|
- /**************************************************************************//**
- * @file ARMCM3.h
- * @brief CMSIS Core Peripheral Access Layer Header File for
- * ARMCM3 Device Series
- * @version V1.07
- * @date 30. January 2012
- *
- * @note
- * Copyright (C) 2012 ARM Limited. All rights reserved.
- *
- * @par
- * ARM Limited (ARM) is supplying this software for use with Cortex-M
- * processor based microcontrollers. This file can be freely distributed
- * within development tools that are supporting such ARM based processors.
- *
- * @par
- * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
- * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
- * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
- * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
- *
- ******************************************************************************/
-
- #ifndef ARMCM3_H
- #define ARMCM3_H
-
- #ifdef __cplusplus
- extern "C" {
- #endif
-
-
- /* ------------------------- Interrupt Number Definition ------------------------ */
-
- typedef enum IRQn
- {
- /* ------------------- Cortex-M3 Processor Exceptions Numbers ------------------- */
- NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
- HardFault_IRQn = -13, /*!< 3 HardFault Interrupt */
- MemoryManagement_IRQn = -12, /*!< 4 Memory Management Interrupt */
- BusFault_IRQn = -11, /*!< 5 Bus Fault Interrupt */
- UsageFault_IRQn = -10, /*!< 6 Usage Fault Interrupt */
- SVCall_IRQn = -5, /*!< 11 SV Call Interrupt */
- DebugMonitor_IRQn = -4, /*!< 12 Debug Monitor Interrupt */
- PendSV_IRQn = -2, /*!< 14 Pend SV Interrupt */
- SysTick_IRQn = -1, /*!< 15 System Tick Interrupt */
-
- /* ---------------------- ARMCM3 Specific Interrupt Numbers --------------------- */
- WDT_IRQn = 0, /*!< Watchdog Timer Interrupt */
- RTC_IRQn = 1, /*!< Real Time Clock Interrupt */
- TIM0_IRQn = 2, /*!< Timer0 / Timer1 Interrupt */
- TIM2_IRQn = 3, /*!< Timer2 / Timer3 Interrupt */
- MCIA_IRQn = 4, /*!< MCIa Interrupt */
- MCIB_IRQn = 5, /*!< MCIb Interrupt */
- UART0_IRQn = 6, /*!< UART0 Interrupt */
- UART1_IRQn = 7, /*!< UART1 Interrupt */
- UART2_IRQn = 8, /*!< UART2 Interrupt */
- UART4_IRQn = 9, /*!< UART4 Interrupt */
- AACI_IRQn = 10, /*!< AACI / AC97 Interrupt */
- CLCD_IRQn = 11, /*!< CLCD Combined Interrupt */
- ENET_IRQn = 12, /*!< Ethernet Interrupt */
- USBDC_IRQn = 13, /*!< USB Device Interrupt */
- USBHC_IRQn = 14, /*!< USB Host Controller Interrupt */
- CHLCD_IRQn = 15, /*!< Character LCD Interrupt */
- FLEXRAY_IRQn = 16, /*!< Flexray Interrupt */
- CAN_IRQn = 17, /*!< CAN Interrupt */
- LIN_IRQn = 18, /*!< LIN Interrupt */
- I2C_IRQn = 19, /*!< I2C ADC/DAC Interrupt */
- CPU_CLCD_IRQn = 28, /*!< CPU CLCD Combined Interrupt */
- UART3_IRQn = 30, /*!< UART3 Interrupt */
- SPI_IRQn = 31, /*!< SPI Touchscreen Interrupt */
- } IRQn_Type;
-
-
- /* ================================================================================ */
- /* ================ Processor and Core Peripheral Section ================ */
- /* ================================================================================ */
-
- /* -------- Configuration of the Cortex-M4 Processor and Core Peripherals ------- */
- #define __CM3_REV 0x0201 /*!< Core revision r2p1 */
- #define __MPU_PRESENT 1 /*!< MPU present or not */
- #define __NVIC_PRIO_BITS 3 /*!< Number of Bits used for Priority Levels */
- #define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
-
- #include <core_cm3.h> /* Processor and core peripherals */
- #include "system_ARMCM3.h" /* System Header */
-
-
- /* ================================================================================ */
- /* ================ Device Specific Peripheral Section ================ */
- /* ================================================================================ */
-
- /* ------------------- Start of section using anonymous unions ------------------ */
- #if defined(__CC_ARM)
- #pragma push
- #pragma anon_unions
- #elif defined(__ICCARM__)
- #pragma language=extended
- #elif defined(__GNUC__)
- /* anonymous unions are enabled by default */
- #elif defined(__TMS470__)
- /* anonymous unions are enabled by default */
- #elif defined(__TASKING__)
- #pragma warning 586
- #else
- #warning Not supported compiler type
- #endif
-
-
-
- /* ================================================================================ */
- /* ================ CPU FPGA System (CPU_SYS) ================ */
- /* ================================================================================ */
- typedef struct
- {
- __I uint32_t ID; /* Offset: 0x000 (R/ ) Board and FPGA Identifier */
- __IO uint32_t MEMCFG; /* Offset: 0x004 (R/W) Remap and Alias Memory Control */
- __I uint32_t SW; /* Offset: 0x008 (R/ ) Switch States */
- __IO uint32_t LED; /* Offset: 0x00C (R/W) LED Output States */
- __I uint32_t TS; /* Offset: 0x010 (R/ ) Touchscreen Register */
- __IO uint32_t CTRL1; /* Offset: 0x014 (R/W) Misc Control Functions */
- uint32_t RESERVED0[2];
- __IO uint32_t CLKCFG; /* Offset: 0x020 (R/W) System Clock Configuration */
- __IO uint32_t WSCFG; /* Offset: 0x024 (R/W) Flash Waitstate Configuration */
- __IO uint32_t CPUCFG; /* Offset: 0x028 (R/W) Processor Configuration */
- uint32_t RESERVED1[3];
- __IO uint32_t BASE; /* Offset: 0x038 (R/W) ROM Table base Address */
- __IO uint32_t ID2; /* Offset: 0x03C (R/W) Secondary Identification Register */
- } ARM_CPU_SYS_TypeDef;
-
-
- /* ================================================================================ */
- /* ================ DUT FPGA System (DUT_SYS) ================ */
- /* ================================================================================ */
- typedef struct
- {
- __I uint32_t ID; /* Offset: 0x000 (R/ ) Board and FPGA Identifier */
- __IO uint32_t PERCFG; /* Offset: 0x004 (R/W) Peripheral Control Signals */
- __I uint32_t SW; /* Offset: 0x008 (R/ ) Switch States */
- __IO uint32_t LED; /* Offset: 0x00C (R/W) LED Output States */
- __IO uint32_t SEG7; /* Offset: 0x010 (R/W) 7-segment LED Output States */
- __I uint32_t CNT25MHz; /* Offset: 0x014 (R/ ) Freerunning counter incrementing at 25MHz */
- __I uint32_t CNT100Hz; /* Offset: 0x018 (R/ ) Freerunning counter incrementing at 100Hz */
- } ARM_DUT_SYS_TypeDef;
-
-
- /* ================================================================================ */
- /* ================ Timer (TIM) ================ */
- /* ================================================================================ */
- typedef struct
- {
- __IO uint32_t Timer1Load; /* Offset: 0x000 (R/W) Timer 1 Load */
- __I uint32_t Timer1Value; /* Offset: 0x004 (R/ ) Timer 1 Counter Current Value */
- __IO uint32_t Timer1Control; /* Offset: 0x008 (R/W) Timer 1 Control */
- __O uint32_t Timer1IntClr; /* Offset: 0x00C ( /W) Timer 1 Interrupt Clear */
- __I uint32_t Timer1RIS; /* Offset: 0x010 (R/ ) Timer 1 Raw Interrupt Status */
- __I uint32_t Timer1MIS; /* Offset: 0x014 (R/ ) Timer 1 Masked Interrupt Status */
- __IO uint32_t Timer1BGLoad; /* Offset: 0x018 (R/W) Background Load Register */
- uint32_t RESERVED0[1];
- __IO uint32_t Timer2Load; /* Offset: 0x020 (R/W) Timer 2 Load */
- __I uint32_t Timer2Value; /* Offset: 0x024 (R/ ) Timer 2 Counter Current Value */
- __IO uint32_t Timer2Control; /* Offset: 0x028 (R/W) Timer 2 Control */
- __O uint32_t Timer2IntClr; /* Offset: 0x02C ( /W) Timer 2 Interrupt Clear */
- __I uint32_t Timer2RIS; /* Offset: 0x030 (R/ ) Timer 2 Raw Interrupt Status */
- __I uint32_t Timer2MIS; /* Offset: 0x034 (R/ ) Timer 2 Masked Interrupt Status */
- __IO uint32_t Timer2BGLoad; /* Offset: 0x038 (R/W) Background Load Register */
- } ARM_TIM_TypeDef;
-
-
- /* ================================================================================ */
- /* ============== Universal Asyncronous Receiver / Transmitter (UART) ============= */
- /* ================================================================================ */
- typedef struct
- {
- __IO uint32_t DR; /* Offset: 0x000 (R/W) Data */
- union {
- __I uint32_t RSR; /* Offset: 0x000 (R/ ) Receive Status */
- __O uint32_t ECR; /* Offset: 0x000 ( /W) Error Clear */
- };
- uint32_t RESERVED0[4];
- __IO uint32_t FR; /* Offset: 0x018 (R/W) Flags */
- uint32_t RESERVED1[1];
- __IO uint32_t ILPR; /* Offset: 0x020 (R/W) IrDA Low-power Counter */
- __IO uint32_t IBRD; /* Offset: 0x024 (R/W) Interger Baud Rate */
- __IO uint32_t FBRD; /* Offset: 0x028 (R/W) Fractional Baud Rate */
- __IO uint32_t LCR_H; /* Offset: 0x02C (R/W) Line Control */
- __IO uint32_t CR; /* Offset: 0x030 (R/W) Control */
- __IO uint32_t IFLS; /* Offset: 0x034 (R/W) Interrupt FIFO Level Select */
- __IO uint32_t IMSC; /* Offset: 0x038 (R/W) Interrupt Mask Set / Clear */
- __IO uint32_t RIS; /* Offset: 0x03C (R/W) Raw Interrupt Status */
- __IO uint32_t MIS; /* Offset: 0x040 (R/W) Masked Interrupt Status */
- __O uint32_t ICR; /* Offset: 0x044 ( /W) Interrupt Clear */
- __IO uint32_t DMACR; /* Offset: 0x048 (R/W) DMA Control */
- } ARM_UART_TypeDef;
-
-
- /* -------------------- End of section using anonymous unions ------------------- */
- #if defined(__CC_ARM)
- #pragma pop
- #elif defined(__ICCARM__)
- /* leave anonymous unions enabled */
- #elif defined(__GNUC__)
- /* anonymous unions are enabled by default */
- #elif defined(__TMS470__)
- /* anonymous unions are enabled by default */
- #elif defined(__TASKING__)
- #pragma warning restore
- #else
- #warning Not supported compiler type
- #endif
-
-
-
-
- /* ================================================================================ */
- /* ================ Peripheral memory map ================ */
- /* ================================================================================ */
- /* -------------------------- CPU FPGA memory map ------------------------------- */
- #define ARM_FLASH_BASE (0x00000000UL)
- #define ARM_RAM_BASE (0x20000000UL)
- #define ARM_RAM_FPGA_BASE (0x1EFF0000UL)
- #define ARM_CPU_CFG_BASE (0xDFFF0000UL)
-
- #define ARM_CPU_SYS_BASE (ARM_CPU_CFG_BASE + 0x00000)
- #define ARM_UART3_BASE (ARM_CPU_CFG_BASE + 0x05000)
-
- /* -------------------------- DUT FPGA memory map ------------------------------- */
- #define ARM_APB_BASE (0x40000000UL)
- #define ARM_AHB_BASE (0x4FF00000UL)
- #define ARM_DMC_BASE (0x60000000UL)
- #define ARM_SMC_BASE (0xA0000000UL)
-
- #define ARM_TIM0_BASE (ARM_APB_BASE + 0x02000)
- #define ARM_TIM2_BASE (ARM_APB_BASE + 0x03000)
- #define ARM_DUT_SYS_BASE (ARM_APB_BASE + 0x04000)
- #define ARM_UART0_BASE (ARM_APB_BASE + 0x06000)
- #define ARM_UART1_BASE (ARM_APB_BASE + 0x07000)
- #define ARM_UART2_BASE (ARM_APB_BASE + 0x08000)
- #define ARM_UART4_BASE (ARM_APB_BASE + 0x09000)
-
-
- /* ================================================================================ */
- /* ================ Peripheral declaration ================ */
- /* ================================================================================ */
- /* -------------------------- CPU FPGA Peripherals ------------------------------ */
- #define ARM_CPU_SYS ((ARM_CPU_SYS_TypeDef *) ARM_CPU_SYS_BASE)
- #define ARM_UART3 (( ARM_UART_TypeDef *) ARM_UART3_BASE)
-
- /* -------------------------- DUT FPGA Peripherals ------------------------------ */
- #define ARM_DUT_SYS ((ARM_DUT_SYS_TypeDef *) ARM_DUT_SYS_BASE)
- #define ARM_TIM0 (( ARM_TIM_TypeDef *) ARM_TIM0_BASE)
- #define ARM_TIM2 (( ARM_TIM_TypeDef *) ARM_TIM2_BASE)
- #define ARM_UART0 (( ARM_UART_TypeDef *) ARM_UART0_BASE)
- #define ARM_UART1 (( ARM_UART_TypeDef *) ARM_UART1_BASE)
- #define ARM_UART2 (( ARM_UART_TypeDef *) ARM_UART2_BASE)
- #define ARM_UART4 (( ARM_UART_TypeDef *) ARM_UART4_BASE)
-
-
- #ifdef __cplusplus
- }
- #endif
-
- #endif /* ARMCM3_H */
|
