hoo2
/
Micro2020
1
0
Fork 0
Code Issues 0 Pull Requests 0 Releases 2 Wiki Activity
Microprocessor and peripheral 2 assignments for AUTH
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
5 Commits
1 Branch
7.9 MiB
 
 
 
 
 
 
Tree: 8033e2dc5d
Branches Tags
${ item.name }
Create branch ${ searchTerm }
from '8033e2dc5d'
${ noResults }
Micro2020/assignment_3/Libraries/drivers/stm32f4xx_hal_conf.h

496 lines
20 KiB
Raw Blame History 

  1. /**

  2.   ******************************************************************************

  3.   * @file    stm32f4xx_hal_conf_template.h

  4.   * @author  MCD Application Team

  5.   * @brief   HAL configuration template file. 

  6.   *          This file should be copied to the application folder and renamed

  7.   *          to stm32f4xx_hal_conf.h.

  8.   ******************************************************************************

  9.   * @attention

  10.   *

  11.   * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.

  12.   * All rights reserved.</center></h2>

  13.   *

  14.   * This software component is licensed by ST under BSD 3-Clause license,

  15.   * the "License"; You may not use this file except in compliance with the

  16.   * License. You may obtain a copy of the License at:

  17.   *                        opensource.org/licenses/BSD-3-Clause

  18.   *

  19.   ******************************************************************************

  20.   */ 

  21. 

  22. /* Define to prevent recursive inclusion -------------------------------------*/

  23. #ifndef __STM32F4xx_HAL_CONF_H

  24. #define __STM32F4xx_HAL_CONF_H

  25. 

  26. #ifdef __cplusplus

  27.  extern "C" {

  28. #endif

  29. 

  30. /* Exported types ------------------------------------------------------------*/

  31. /* Exported constants --------------------------------------------------------*/

  32. 

  33. /* ########################## Module Selection ############################## */

  34. /**

  35.   * @brief This is the list of modules to be used in the HAL driver 

  36.   */

  37. #define HAL_MODULE_ENABLED  

  38. #define HAL_ADC_MODULE_ENABLED

  39. #define HAL_CAN_MODULE_ENABLED

  40. /* #define HAL_CAN_LEGACY_MODULE_ENABLED */

  41. #define HAL_CRC_MODULE_ENABLED

  42. #define HAL_CEC_MODULE_ENABLED

  43. #define HAL_CRYP_MODULE_ENABLED

  44. #define HAL_DAC_MODULE_ENABLED

  45. #define HAL_DCMI_MODULE_ENABLED

  46. #define HAL_DMA_MODULE_ENABLED

  47. #define HAL_DMA2D_MODULE_ENABLED

  48. #define HAL_ETH_MODULE_ENABLED

  49. #define HAL_FLASH_MODULE_ENABLED

  50. #define HAL_NAND_MODULE_ENABLED

  51. #define HAL_NOR_MODULE_ENABLED

  52. #define HAL_PCCARD_MODULE_ENABLED

  53. #define HAL_SRAM_MODULE_ENABLED

  54. #define HAL_SDRAM_MODULE_ENABLED

  55. #define HAL_HASH_MODULE_ENABLED

  56. #define HAL_GPIO_MODULE_ENABLED

  57. #define HAL_EXTI_MODULE_ENABLED

  58. #define HAL_I2C_MODULE_ENABLED

  59. #define HAL_SMBUS_MODULE_ENABLED

  60. #define HAL_I2S_MODULE_ENABLED

  61. #define HAL_IWDG_MODULE_ENABLED

  62. #define HAL_LTDC_MODULE_ENABLED

  63. #define HAL_DSI_MODULE_ENABLED

  64. #define HAL_PWR_MODULE_ENABLED

  65. #define HAL_QSPI_MODULE_ENABLED

  66. #define HAL_RCC_MODULE_ENABLED

  67. #define HAL_RNG_MODULE_ENABLED

  68. #define HAL_RTC_MODULE_ENABLED

  69. #define HAL_SAI_MODULE_ENABLED

  70. #define HAL_SD_MODULE_ENABLED

  71. #define HAL_SPI_MODULE_ENABLED

  72. #define HAL_TIM_MODULE_ENABLED

  73. #define HAL_UART_MODULE_ENABLED

  74. #define HAL_USART_MODULE_ENABLED

  75. #define HAL_IRDA_MODULE_ENABLED

  76. #define HAL_SMARTCARD_MODULE_ENABLED

  77. #define HAL_WWDG_MODULE_ENABLED

  78. #define HAL_CORTEX_MODULE_ENABLED

  79. #define HAL_PCD_MODULE_ENABLED

  80. #define HAL_HCD_MODULE_ENABLED

  81. #define HAL_FMPI2C_MODULE_ENABLED

  82. #define HAL_SPDIFRX_MODULE_ENABLED

  83. #define HAL_DFSDM_MODULE_ENABLED

  84. #define HAL_LPTIM_MODULE_ENABLED

  85. #define HAL_MMC_MODULE_ENABLED

  86. 

  87. /* ########################## HSE/HSI Values adaptation ##################### */

  88. /**

  89.   * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.

  90.   *        This value is used by the RCC HAL module to compute the system frequency

  91.   *        (when HSE is used as system clock source, directly or through the PLL).  

  92.   */

  93. #if !defined  (HSE_VALUE) 

  94.   #define HSE_VALUE              25000000U /*!< Value of the External oscillator in Hz */

  95. #endif /* HSE_VALUE */

  96. 

  97. #if !defined  (HSE_STARTUP_TIMEOUT)

  98.   #define HSE_STARTUP_TIMEOUT    100U      /*!< Time out for HSE start up, in ms */

  99. #endif /* HSE_STARTUP_TIMEOUT */

  100. 

  101. /**

  102.   * @brief Internal High Speed oscillator (HSI) value.

  103.   *        This value is used by the RCC HAL module to compute the system frequency

  104.   *        (when HSI is used as system clock source, directly or through the PLL). 

  105.   */

  106. #if !defined  (HSI_VALUE)

  107.   #define HSI_VALUE              16000000U /*!< Value of the Internal oscillator in Hz */

  108. #endif /* HSI_VALUE */

  109. 

  110. /**

  111.   * @brief Internal Low Speed oscillator (LSI) value.

  112.   */

  113. #if !defined  (LSI_VALUE) 

  114.  #define LSI_VALUE               32000U    /*!< LSI Typical Value in Hz */

  115. #endif /* LSI_VALUE */                     /*!< Value of the Internal Low Speed oscillator in Hz

  116.                                                 The real value may vary depending on the variations

  117.                                                 in voltage and temperature. */

  118. /**

  119.   * @brief External Low Speed oscillator (LSE) value.

  120.   */

  121. #if !defined  (LSE_VALUE)

  122.  #define LSE_VALUE               32768U    /*!< Value of the External Low Speed oscillator in Hz */

  123. #endif /* LSE_VALUE */

  124. 

  125. #if !defined  (LSE_STARTUP_TIMEOUT)

  126.   #define LSE_STARTUP_TIMEOUT    5000U     /*!< Time out for LSE start up, in ms */

  127. #endif /* LSE_STARTUP_TIMEOUT */

  128. 

  129. /**

  130.   * @brief External clock source for I2S peripheral

  131.   *        This value is used by the I2S HAL module to compute the I2S clock source 

  132.   *        frequency, this source is inserted directly through I2S_CKIN pad. 

  133.   */

  134. #if !defined  (EXTERNAL_CLOCK_VALUE)

  135.   #define EXTERNAL_CLOCK_VALUE     12288000U /*!< Value of the External oscillator in Hz*/

  136. #endif /* EXTERNAL_CLOCK_VALUE */

  137. 

  138. /* Tip: To avoid modifying this file each time you need to use different HSE,

  139.    ===  you can define the HSE value in your toolchain compiler preprocessor. */

  140. 

  141. /* ########################### System Configuration ######################### */

  142. /**

  143.   * @brief This is the HAL system configuration section

  144.   */     

  145. #define  VDD_VALUE                    3300U /*!< Value of VDD in mv */

  146. #define  TICK_INT_PRIORITY            0x0FU /*!< tick interrupt priority */

  147. #define  USE_RTOS                     0U

  148. #define  PREFETCH_ENABLE              1U

  149. #define  INSTRUCTION_CACHE_ENABLE     1U

  150. #define  DATA_CACHE_ENABLE            1U

  151. 

  152. #define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */

  153. #define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */

  154. #define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */

  155. #define  USE_HAL_CRYP_REGISTER_CALLBACKS        0U /* CRYP register callback disabled      */

  156. #define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */

  157. #define  USE_HAL_DCMI_REGISTER_CALLBACKS        0U /* DCMI register callback disabled      */

  158. #define  USE_HAL_DFSDM_REGISTER_CALLBACKS       0U /* DFSDM register callback disabled     */

  159. #define  USE_HAL_DMA2D_REGISTER_CALLBACKS       0U /* DMA2D register callback disabled     */

  160. #define  USE_HAL_DSI_REGISTER_CALLBACKS         0U /* DSI register callback disabled       */

  161. #define  USE_HAL_ETH_REGISTER_CALLBACKS         0U /* ETH register callback disabled       */

  162. #define  USE_HAL_HASH_REGISTER_CALLBACKS        0U /* HASH register callback disabled      */

  163. #define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */

  164. #define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */

  165. #define  USE_HAL_FMPI2C_REGISTER_CALLBACKS      0U /* FMPI2C register callback disabled    */

  166. #define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */

  167. #define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */

  168. #define  USE_HAL_LPTIM_REGISTER_CALLBACKS       0U /* LPTIM register callback disabled     */

  169. #define  USE_HAL_LTDC_REGISTER_CALLBACKS        0U /* LTDC register callback disabled      */

  170. #define  USE_HAL_MMC_REGISTER_CALLBACKS         0U /* MMC register callback disabled       */

  171. #define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */

  172. #define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */

  173. #define  USE_HAL_PCCARD_REGISTER_CALLBACKS      0U /* PCCARD register callback disabled    */

  174. #define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */

  175. #define  USE_HAL_QSPI_REGISTER_CALLBACKS        0U /* QSPI register callback disabled      */

  176. #define  USE_HAL_RNG_REGISTER_CALLBACKS         0U /* RNG register callback disabled       */

  177. #define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */

  178. #define  USE_HAL_SAI_REGISTER_CALLBACKS         0U /* SAI register callback disabled       */

  179. #define  USE_HAL_SD_REGISTER_CALLBACKS          0U /* SD register callback disabled        */

  180. #define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */

  181. #define  USE_HAL_SDRAM_REGISTER_CALLBACKS       0U /* SDRAM register callback disabled     */

  182. #define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */

  183. #define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS     0U /* SPDIFRX register callback disabled   */

  184. #define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */

  185. #define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */

  186. #define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */

  187. #define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */

  188. #define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */

  189. #define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */

  190. 

  191. /* ########################## Assert Selection ############################## */

  192. /**

  193.   * @brief Uncomment the line below to expanse the "assert_param" macro in the 

  194.   *        HAL drivers code

  195.   */

  196. /* #define USE_FULL_ASSERT    1U */

  197. 

  198. /* ################## Ethernet peripheral configuration ##################### */

  199. 

  200. /* Section 1 : Ethernet peripheral configuration */

  201. 

  202. /* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */

  203. #define MAC_ADDR0   2U

  204. #define MAC_ADDR1   0U

  205. #define MAC_ADDR2   0U

  206. #define MAC_ADDR3   0U

  207. #define MAC_ADDR4   0U

  208. #define MAC_ADDR5   0U

  209. 

  210. /* Definition of the Ethernet driver buffers size and count */   

  211. #define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */

  212. #define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */

  213. #define ETH_RXBUFNB                    4U                  /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */

  214. #define ETH_TXBUFNB                    4U                  /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */

  215. 

  216. /* Section 2: PHY configuration section */

  217. 

  218. /* DP83848 PHY Address*/ 

  219. #define DP83848_PHY_ADDRESS             0x01U

  220. /* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ 

  221. #define PHY_RESET_DELAY                 0x000000FFU

  222. /* PHY Configuration delay */

  223. #define PHY_CONFIG_DELAY                0x00000FFFU

  224. 

  225. #define PHY_READ_TO                     0x0000FFFFU

  226. #define PHY_WRITE_TO                    0x0000FFFFU

  227. 

  228. /* Section 3: Common PHY Registers */

  229. 

  230. #define PHY_BCR                         ((uint16_t)0x0000)  /*!< Transceiver Basic Control Register   */

  231. #define PHY_BSR                         ((uint16_t)0x0001)  /*!< Transceiver Basic Status Register    */

  232.  

  233. #define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */

  234. #define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */

  235. #define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */

  236. #define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000)  /*!< Set the half-duplex mode at 100 Mb/s */

  237. #define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100)  /*!< Set the full-duplex mode at 10 Mb/s  */

  238. #define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000)  /*!< Set the half-duplex mode at 10 Mb/s  */

  239. #define PHY_AUTONEGOTIATION             ((uint16_t)0x1000)  /*!< Enable auto-negotiation function     */

  240. #define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200)  /*!< Restart auto-negotiation function    */

  241. #define PHY_POWERDOWN                   ((uint16_t)0x0800)  /*!< Select the power down mode           */

  242. #define PHY_ISOLATE                     ((uint16_t)0x0400)  /*!< Isolate PHY from MII                 */

  243. 

  244. #define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */

  245. #define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */

  246. #define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */

  247.   

  248. /* Section 4: Extended PHY Registers */

  249. 

  250. #define PHY_SR                          ((uint16_t)0x0010)  /*!< PHY status register Offset                      */

  251. #define PHY_MICR                        ((uint16_t)0x0011)  /*!< MII Interrupt Control Register                  */

  252. #define PHY_MISR                        ((uint16_t)0x0012)  /*!< MII Interrupt Status and Misc. Control Register */

  253.  

  254. #define PHY_LINK_STATUS                 ((uint16_t)0x0001)  /*!< PHY Link mask                                   */

  255. #define PHY_SPEED_STATUS                ((uint16_t)0x0002)  /*!< PHY Speed mask                                  */

  256. #define PHY_DUPLEX_STATUS               ((uint16_t)0x0004)  /*!< PHY Duplex mask                                 */

  257. 

  258. #define PHY_MICR_INT_EN                 ((uint16_t)0x0002)  /*!< PHY Enable interrupts                           */

  259. #define PHY_MICR_INT_OE                 ((uint16_t)0x0001)  /*!< PHY Enable output interrupt events              */

  260. 

  261. #define PHY_MISR_LINK_INT_EN            ((uint16_t)0x0020)  /*!< Enable Interrupt on change of link status       */

  262. #define PHY_LINK_INTERRUPT              ((uint16_t)0x2000)  /*!< PHY link status interrupt mask                  */

  263. 

  264. /* ################## SPI peripheral configuration ########################## */

  265. 

  266. /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver

  267. * Activated: CRC code is present inside driver

  268. * Deactivated: CRC code cleaned from driver

  269. */

  270. 

  271. #define USE_SPI_CRC                     1U

  272. 

  273. /* Includes ------------------------------------------------------------------*/

  274. /**

  275.   * @brief Include module's header file 

  276.   */

  277. 

  278. #ifdef HAL_RCC_MODULE_ENABLED

  279.   #include "stm32f4xx_hal_rcc.h"

  280. #endif /* HAL_RCC_MODULE_ENABLED */

  281. 

  282. #ifdef HAL_GPIO_MODULE_ENABLED

  283.   #include "stm32f4xx_hal_gpio.h"

  284. #endif /* HAL_GPIO_MODULE_ENABLED */

  285. 

  286. #ifdef HAL_EXTI_MODULE_ENABLED

  287.   #include "stm32f4xx_hal_exti.h"

  288. #endif /* HAL_EXTI_MODULE_ENABLED */

  289. 

  290. #ifdef HAL_DMA_MODULE_ENABLED

  291.   #include "stm32f4xx_hal_dma.h"

  292. #endif /* HAL_DMA_MODULE_ENABLED */

  293.    

  294. #ifdef HAL_CORTEX_MODULE_ENABLED

  295.   #include "stm32f4xx_hal_cortex.h"

  296. #endif /* HAL_CORTEX_MODULE_ENABLED */

  297. 

  298. #ifdef HAL_ADC_MODULE_ENABLED

  299.   #include "stm32f4xx_hal_adc.h"

  300. #endif /* HAL_ADC_MODULE_ENABLED */

  301. 

  302. #ifdef HAL_CAN_MODULE_ENABLED

  303.   #include "stm32f4xx_hal_can.h"

  304. #endif /* HAL_CAN_MODULE_ENABLED */

  305. 

  306. #ifdef HAL_CAN_LEGACY_MODULE_ENABLED

  307.   #include "stm32f4xx_hal_can_legacy.h"

  308. #endif /* HAL_CAN_LEGACY_MODULE_ENABLED */

  309. 

  310. #ifdef HAL_CRC_MODULE_ENABLED

  311.   #include "stm32f4xx_hal_crc.h"

  312. #endif /* HAL_CRC_MODULE_ENABLED */

  313. 

  314. #ifdef HAL_CRYP_MODULE_ENABLED

  315.   #include "stm32f4xx_hal_cryp.h" 

  316. #endif /* HAL_CRYP_MODULE_ENABLED */

  317. 

  318. #ifdef HAL_DMA2D_MODULE_ENABLED

  319.   #include "stm32f4xx_hal_dma2d.h"

  320. #endif /* HAL_DMA2D_MODULE_ENABLED */

  321. 

  322. #ifdef HAL_DAC_MODULE_ENABLED

  323.   #include "stm32f4xx_hal_dac.h"

  324. #endif /* HAL_DAC_MODULE_ENABLED */

  325. 

  326. #ifdef HAL_DCMI_MODULE_ENABLED

  327.   #include "stm32f4xx_hal_dcmi.h"

  328. #endif /* HAL_DCMI_MODULE_ENABLED */

  329. 

  330. #ifdef HAL_ETH_MODULE_ENABLED

  331.   #include "stm32f4xx_hal_eth.h"

  332. #endif /* HAL_ETH_MODULE_ENABLED */

  333. 

  334. #ifdef HAL_FLASH_MODULE_ENABLED

  335.   #include "stm32f4xx_hal_flash.h"

  336. #endif /* HAL_FLASH_MODULE_ENABLED */

  337.  

  338. #ifdef HAL_SRAM_MODULE_ENABLED

  339.   #include "stm32f4xx_hal_sram.h"

  340. #endif /* HAL_SRAM_MODULE_ENABLED */

  341. 

  342. #ifdef HAL_NOR_MODULE_ENABLED

  343.   #include "stm32f4xx_hal_nor.h"

  344. #endif /* HAL_NOR_MODULE_ENABLED */

  345. 

  346. #ifdef HAL_NAND_MODULE_ENABLED

  347.   #include "stm32f4xx_hal_nand.h"

  348. #endif /* HAL_NAND_MODULE_ENABLED */

  349. 

  350. #ifdef HAL_PCCARD_MODULE_ENABLED

  351.   #include "stm32f4xx_hal_pccard.h"

  352. #endif /* HAL_PCCARD_MODULE_ENABLED */ 

  353.   

  354. #ifdef HAL_SDRAM_MODULE_ENABLED

  355.   #include "stm32f4xx_hal_sdram.h"

  356. #endif /* HAL_SDRAM_MODULE_ENABLED */

  357. 

  358. #ifdef HAL_HASH_MODULE_ENABLED

  359.  #include "stm32f4xx_hal_hash.h"

  360. #endif /* HAL_HASH_MODULE_ENABLED */

  361. 

  362. #ifdef HAL_I2C_MODULE_ENABLED

  363.  #include "stm32f4xx_hal_i2c.h"

  364. #endif /* HAL_I2C_MODULE_ENABLED */

  365. 

  366. #ifdef HAL_SMBUS_MODULE_ENABLED

  367.  #include "stm32f4xx_hal_smbus.h"

  368. #endif /* HAL_SMBUS_MODULE_ENABLED */

  369. 

  370. #ifdef HAL_I2S_MODULE_ENABLED

  371.  #include "stm32f4xx_hal_i2s.h"

  372. #endif /* HAL_I2S_MODULE_ENABLED */

  373. 

  374. #ifdef HAL_IWDG_MODULE_ENABLED

  375.  #include "stm32f4xx_hal_iwdg.h"

  376. #endif /* HAL_IWDG_MODULE_ENABLED */

  377. 

  378. #ifdef HAL_LTDC_MODULE_ENABLED

  379.  #include "stm32f4xx_hal_ltdc.h"

  380. #endif /* HAL_LTDC_MODULE_ENABLED */

  381. 

  382. #ifdef HAL_PWR_MODULE_ENABLED

  383.  #include "stm32f4xx_hal_pwr.h"

  384. #endif /* HAL_PWR_MODULE_ENABLED */

  385. 

  386. #ifdef HAL_RNG_MODULE_ENABLED

  387.  #include "stm32f4xx_hal_rng.h"

  388. #endif /* HAL_RNG_MODULE_ENABLED */

  389. 

  390. #ifdef HAL_RTC_MODULE_ENABLED

  391.  #include "stm32f4xx_hal_rtc.h"

  392. #endif /* HAL_RTC_MODULE_ENABLED */

  393. 

  394. #ifdef HAL_SAI_MODULE_ENABLED

  395.  #include "stm32f4xx_hal_sai.h"

  396. #endif /* HAL_SAI_MODULE_ENABLED */

  397. 

  398. #ifdef HAL_SD_MODULE_ENABLED

  399.  #include "stm32f4xx_hal_sd.h"

  400. #endif /* HAL_SD_MODULE_ENABLED */

  401. 

  402. #ifdef HAL_SPI_MODULE_ENABLED

  403.  #include "stm32f4xx_hal_spi.h"

  404. #endif /* HAL_SPI_MODULE_ENABLED */

  405. 

  406. #ifdef HAL_TIM_MODULE_ENABLED

  407.  #include "stm32f4xx_hal_tim.h"

  408. #endif /* HAL_TIM_MODULE_ENABLED */

  409. 

  410. #ifdef HAL_UART_MODULE_ENABLED

  411.  #include "stm32f4xx_hal_uart.h"

  412. #endif /* HAL_UART_MODULE_ENABLED */

  413. 

  414. #ifdef HAL_USART_MODULE_ENABLED

  415.  #include "stm32f4xx_hal_usart.h"

  416. #endif /* HAL_USART_MODULE_ENABLED */

  417. 

  418. #ifdef HAL_IRDA_MODULE_ENABLED

  419.  #include "stm32f4xx_hal_irda.h"

  420. #endif /* HAL_IRDA_MODULE_ENABLED */

  421. 

  422. #ifdef HAL_SMARTCARD_MODULE_ENABLED

  423.  #include "stm32f4xx_hal_smartcard.h"

  424. #endif /* HAL_SMARTCARD_MODULE_ENABLED */

  425. 

  426. #ifdef HAL_WWDG_MODULE_ENABLED

  427.  #include "stm32f4xx_hal_wwdg.h"

  428. #endif /* HAL_WWDG_MODULE_ENABLED */

  429. 

  430. #ifdef HAL_PCD_MODULE_ENABLED

  431.  #include "stm32f4xx_hal_pcd.h"

  432. #endif /* HAL_PCD_MODULE_ENABLED */

  433. 

  434. #ifdef HAL_HCD_MODULE_ENABLED

  435.  #include "stm32f4xx_hal_hcd.h"

  436. #endif /* HAL_HCD_MODULE_ENABLED */

  437.    

  438. #ifdef HAL_DSI_MODULE_ENABLED

  439.  #include "stm32f4xx_hal_dsi.h"

  440. #endif /* HAL_DSI_MODULE_ENABLED */

  441. 

  442. #ifdef HAL_QSPI_MODULE_ENABLED

  443.  #include "stm32f4xx_hal_qspi.h"

  444. #endif /* HAL_QSPI_MODULE_ENABLED */

  445. 

  446. #ifdef HAL_CEC_MODULE_ENABLED

  447.  #include "stm32f4xx_hal_cec.h"

  448. #endif /* HAL_CEC_MODULE_ENABLED */

  449. 

  450. #ifdef HAL_FMPI2C_MODULE_ENABLED

  451.  #include "stm32f4xx_hal_fmpi2c.h"

  452. #endif /* HAL_FMPI2C_MODULE_ENABLED */

  453. 

  454. #ifdef HAL_SPDIFRX_MODULE_ENABLED

  455.  #include "stm32f4xx_hal_spdifrx.h"

  456. #endif /* HAL_SPDIFRX_MODULE_ENABLED */

  457. 

  458. #ifdef HAL_DFSDM_MODULE_ENABLED

  459.  #include "stm32f4xx_hal_dfsdm.h"

  460. #endif /* HAL_DFSDM_MODULE_ENABLED */

  461. 

  462. #ifdef HAL_LPTIM_MODULE_ENABLED

  463.  #include "stm32f4xx_hal_lptim.h"

  464. #endif /* HAL_LPTIM_MODULE_ENABLED */

  465. 

  466. #ifdef HAL_MMC_MODULE_ENABLED

  467.  #include "stm32f4xx_hal_mmc.h"

  468. #endif /* HAL_MMC_MODULE_ENABLED */

  469. 

  470. /* Exported macro ------------------------------------------------------------*/

  471. #ifdef  USE_FULL_ASSERT

  472. /**

  473.   * @brief  The assert_param macro is used for function's parameters check.

  474.   * @param  expr If expr is false, it calls assert_failed function

  475.   *         which reports the name of the source file and the source

  476.   *         line number of the call that failed. 

  477.   *         If expr is true, it returns no value.

  478.   * @retval None

  479.   */

  480.   #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))

  481. /* Exported functions ------------------------------------------------------- */

  482.   void assert_failed(uint8_t* file, uint32_t line);

  483. #else

  484.   #define assert_param(expr) ((void)0U)

  485. #endif /* USE_FULL_ASSERT */

  486. 

  487. 

  488. #ifdef __cplusplus

  489. }

  490. #endif

  491. 

  492. #endif /* __STM32F4xx_HAL_CONF_H */

  493.  

  494. 

  495. /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/