25'ten fazla konu seçemezsiniz Konular bir harf veya rakamla başlamalı, kısa çizgiler ('-') içerebilir ve en fazla 35 karakter uzunluğunda olabilir.

Doxyfile 106 KiB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189119011911192119311941195119611971198119912001201120212031204120512061207120812091210121112121213121412151216121712181219122012211222122312241225122612271228122912301231123212331234123512361237123812391240124112421243124412451246124712481249125012511252125312541255125612571258125912601261126212631264126512661267126812691270127112721273127412751276127712781279128012811282128312841285128612871288128912901291129212931294129512961297129812991300130113021303130413051306130713081309131013111312131313141315131613171318131913201321132213231324132513261327132813291330133113321333133413351336133713381339134013411342134313441345134613471348134913501351135213531354135513561357135813591360136113621363136413651366136713681369137013711372137313741375137613771378137913801381138213831384138513861387138813891390139113921393139413951396139713981399140014011402140314041405140614071408140914101411141214131414141514161417141814191420142114221423142414251426142714281429143014311432143314341435143614371438143914401441144214431444144514461447144814491450145114521453145414551456145714581459146014611462146314641465146614671468146914701471147214731474147514761477147814791480148114821483148414851486148714881489149014911492149314941495149614971498149915001501150215031504150515061507150815091510151115121513151415151516151715181519152015211522152315241525152615271528152915301531153215331534153515361537153815391540154115421543154415451546154715481549155015511552155315541555155615571558155915601561156215631564156515661567156815691570157115721573157415751576157715781579158015811582158315841585158615871588158915901591159215931594159515961597159815991600160116021603160416051606160716081609161016111612161316141615161616171618161916201621162216231624162516261627162816291630163116321633163416351636163716381639164016411642164316441645164616471648164916501651165216531654165516561657165816591660166116621663166416651666166716681669167016711672167316741675167616771678167916801681168216831684168516861687168816891690169116921693169416951696169716981699170017011702170317041705170617071708170917101711171217131714171517161717171817191720172117221723172417251726172717281729173017311732173317341735173617371738173917401741174217431744174517461747174817491750175117521753175417551756175717581759176017611762176317641765176617671768176917701771177217731774177517761777177817791780178117821783178417851786178717881789179017911792179317941795179617971798179918001801180218031804180518061807180818091810181118121813181418151816181718181819182018211822182318241825182618271828182918301831183218331834183518361837183818391840184118421843184418451846184718481849185018511852185318541855185618571858185918601861186218631864186518661867186818691870187118721873187418751876187718781879188018811882188318841885188618871888188918901891189218931894189518961897189818991900190119021903190419051906190719081909191019111912191319141915191619171918191919201921192219231924192519261927192819291930193119321933193419351936193719381939194019411942194319441945194619471948194919501951195219531954195519561957195819591960196119621963196419651966196719681969197019711972197319741975197619771978197919801981198219831984198519861987198819891990199119921993199419951996199719981999200020012002200320042005200620072008200920102011201220132014201520162017201820192020202120222023202420252026202720282029203020312032203320342035203620372038203920402041204220432044204520462047204820492050205120522053205420552056205720582059206020612062206320642065206620672068206920702071207220732074207520762077207820792080208120822083208420852086208720882089209020912092209320942095209620972098209921002101210221032104210521062107210821092110211121122113211421152116211721182119212021212122212321242125212621272128212921302131213221332134213521362137213821392140214121422143214421452146214721482149215021512152215321542155215621572158215921602161216221632164216521662167216821692170217121722173217421752176217721782179218021812182218321842185218621872188218921902191219221932194219521962197219821992200220122022203220422052206220722082209221022112212221322142215221622172218221922202221222222232224222522262227222822292230223122322233223422352236223722382239224022412242224322442245224622472248224922502251225222532254225522562257225822592260226122622263226422652266226722682269227022712272227322742275227622772278227922802281228222832284228522862287228822892290229122922293229422952296229722982299230023012302230323042305230623072308230923102311231223132314231523162317231823192320232123222323232423252326232723282329233023312332233323342335233623372338233923402341234223432344234523462347234823492350235123522353235423552356235723582359236023612362236323642365236623672368236923702371237223732374237523762377237823792380238123822383238423852386238723882389239023912392239323942395239623972398239924002401240224032404240524062407240824092410241124122413241424152416241724182419242024212422242324242425242624272428242924302431243224332434243524362437243824392440244124422443244424452446244724482449245024512452245324542455245624572458245924602461246224632464246524662467246824692470247124722473247424752476247724782479248024812482248324842485248624872488248924902491249224932494
  1. # Doxyfile 1.8.13
  2. # This file describes the settings to be used by the documentation system
  3. # doxygen (www.doxygen.org) for a project.
  4. #
  5. # All text after a double hash (##) is considered a comment and is placed in
  6. # front of the TAG it is preceding.
  7. #
  8. # All text after a single hash (#) is considered a comment and will be ignored.
  9. # The format is:
  10. # TAG = value [value, ...]
  11. # For lists, items can also be appended using:
  12. # TAG += value [value, ...]
  13. # Values that contain spaces should be placed between quotes (\" \").
  14. #---------------------------------------------------------------------------
  15. # Project related configuration options
  16. #---------------------------------------------------------------------------
  17. # This tag specifies the encoding used for all characters in the config file
  18. # that follow. The default is UTF-8 which is also the encoding used for all text
  19. # before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
  20. # built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
  21. # for the list of possible encodings.
  22. # The default value is: UTF-8.
  23. DOXYFILE_ENCODING = UTF-8
  24. # The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
  25. # double-quotes, unless you are using Doxywizard) that should identify the
  26. # project for which the documentation is generated. This name is used in the
  27. # title of most generated pages and in a few other places.
  28. # The default value is: My Project.
  29. PROJECT_NAME = Labyrinth
  30. # The PROJECT_NUMBER tag can be used to enter a project or revision number. This
  31. # could be handy for archiving the generated documentation or if some version
  32. # control system is used.
  33. PROJECT_NUMBER =
  34. # Using the PROJECT_BRIEF tag one can provide an optional one line description
  35. # for a project that appears at the top of each page and should give viewer a
  36. # quick idea about the purpose of the project. Keep the description short.
  37. PROJECT_BRIEF = "A labyrinth game assignment"
  38. # With the PROJECT_LOGO tag one can specify a logo or an icon that is included
  39. # in the documentation. The maximum height of the logo should not exceed 55
  40. # pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
  41. # the logo to the output directory.
  42. PROJECT_LOGO =
  43. # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
  44. # into which the generated documentation will be written. If a relative path is
  45. # entered, it will be relative to the location where doxygen was started. If
  46. # left blank the current directory will be used.
  47. OUTPUT_DIRECTORY = doc
  48. # If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
  49. # directories (in 2 levels) under the output directory of each output format and
  50. # will distribute the generated files over these directories. Enabling this
  51. # option can be useful when feeding doxygen a huge amount of source files, where
  52. # putting all generated files in the same directory would otherwise causes
  53. # performance problems for the file system.
  54. # The default value is: NO.
  55. CREATE_SUBDIRS = NO
  56. # If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
  57. # characters to appear in the names of generated files. If set to NO, non-ASCII
  58. # characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
  59. # U+3044.
  60. # The default value is: NO.
  61. ALLOW_UNICODE_NAMES = NO
  62. # The OUTPUT_LANGUAGE tag is used to specify the language in which all
  63. # documentation generated by doxygen is written. Doxygen will use this
  64. # information to generate all constant output in the proper language.
  65. # Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
  66. # Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
  67. # Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
  68. # Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
  69. # Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
  70. # Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
  71. # Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
  72. # Ukrainian and Vietnamese.
  73. # The default value is: English.
  74. OUTPUT_LANGUAGE = English
  75. # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
  76. # descriptions after the members that are listed in the file and class
  77. # documentation (similar to Javadoc). Set to NO to disable this.
  78. # The default value is: YES.
  79. BRIEF_MEMBER_DESC = YES
  80. # If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
  81. # description of a member or function before the detailed description
  82. #
  83. # Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
  84. # brief descriptions will be completely suppressed.
  85. # The default value is: YES.
  86. REPEAT_BRIEF = YES
  87. # This tag implements a quasi-intelligent brief description abbreviator that is
  88. # used to form the text in various listings. Each string in this list, if found
  89. # as the leading text of the brief description, will be stripped from the text
  90. # and the result, after processing the whole list, is used as the annotated
  91. # text. Otherwise, the brief description is used as-is. If left blank, the
  92. # following values are used ($name is automatically replaced with the name of
  93. # the entity):The $name class, The $name widget, The $name file, is, provides,
  94. # specifies, contains, represents, a, an and the.
  95. ABBREVIATE_BRIEF = "The $name class" \
  96. "The $name widget" \
  97. "The $name file" \
  98. is \
  99. provides \
  100. specifies \
  101. contains \
  102. represents \
  103. a \
  104. an \
  105. the
  106. # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
  107. # doxygen will generate a detailed section even if there is only a brief
  108. # description.
  109. # The default value is: NO.
  110. ALWAYS_DETAILED_SEC = NO
  111. # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
  112. # inherited members of a class in the documentation of that class as if those
  113. # members were ordinary class members. Constructors, destructors and assignment
  114. # operators of the base classes will not be shown.
  115. # The default value is: NO.
  116. INLINE_INHERITED_MEMB = NO
  117. # If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
  118. # before files name in the file list and in the header files. If set to NO the
  119. # shortest path that makes the file name unique will be used
  120. # The default value is: YES.
  121. FULL_PATH_NAMES = YES
  122. # The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
  123. # Stripping is only done if one of the specified strings matches the left-hand
  124. # part of the path. The tag can be used to show relative paths in the file list.
  125. # If left blank the directory from which doxygen is run is used as the path to
  126. # strip.
  127. #
  128. # Note that you can specify absolute paths here, but also relative paths, which
  129. # will be relative from the directory where doxygen is started.
  130. # This tag requires that the tag FULL_PATH_NAMES is set to YES.
  131. STRIP_FROM_PATH =
  132. # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
  133. # path mentioned in the documentation of a class, which tells the reader which
  134. # header file to include in order to use a class. If left blank only the name of
  135. # the header file containing the class definition is used. Otherwise one should
  136. # specify the list of include paths that are normally passed to the compiler
  137. # using the -I flag.
  138. STRIP_FROM_INC_PATH =
  139. # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
  140. # less readable) file names. This can be useful is your file systems doesn't
  141. # support long names like on DOS, Mac, or CD-ROM.
  142. # The default value is: NO.
  143. SHORT_NAMES = NO
  144. # If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
  145. # first line (until the first dot) of a Javadoc-style comment as the brief
  146. # description. If set to NO, the Javadoc-style will behave just like regular Qt-
  147. # style comments (thus requiring an explicit @brief command for a brief
  148. # description.)
  149. # The default value is: NO.
  150. JAVADOC_AUTOBRIEF = YES
  151. # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
  152. # line (until the first dot) of a Qt-style comment as the brief description. If
  153. # set to NO, the Qt-style will behave just like regular Qt-style comments (thus
  154. # requiring an explicit \brief command for a brief description.)
  155. # The default value is: NO.
  156. QT_AUTOBRIEF = NO
  157. # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
  158. # multi-line C++ special comment block (i.e. a block of //! or /// comments) as
  159. # a brief description. This used to be the default behavior. The new default is
  160. # to treat a multi-line C++ comment block as a detailed description. Set this
  161. # tag to YES if you prefer the old behavior instead.
  162. #
  163. # Note that setting this tag to YES also means that rational rose comments are
  164. # not recognized any more.
  165. # The default value is: NO.
  166. MULTILINE_CPP_IS_BRIEF = NO
  167. # If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
  168. # documentation from any documented member that it re-implements.
  169. # The default value is: YES.
  170. INHERIT_DOCS = YES
  171. # If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
  172. # page for each member. If set to NO, the documentation of a member will be part
  173. # of the file/class/namespace that contains it.
  174. # The default value is: NO.
  175. SEPARATE_MEMBER_PAGES = NO
  176. # The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
  177. # uses this value to replace tabs by spaces in code fragments.
  178. # Minimum value: 1, maximum value: 16, default value: 4.
  179. TAB_SIZE = 4
  180. # This tag can be used to specify a number of aliases that act as commands in
  181. # the documentation. An alias has the form:
  182. # name=value
  183. # For example adding
  184. # "sideeffect=@par Side Effects:\n"
  185. # will allow you to put the command \sideeffect (or @sideeffect) in the
  186. # documentation, which will result in a user-defined paragraph with heading
  187. # "Side Effects:". You can put \n's in the value part of an alias to insert
  188. # newlines.
  189. ALIASES =
  190. # This tag can be used to specify a number of word-keyword mappings (TCL only).
  191. # A mapping has the form "name=value". For example adding "class=itcl::class"
  192. # will allow you to use the command class in the itcl::class meaning.
  193. TCL_SUBST =
  194. # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
  195. # only. Doxygen will then generate output that is more tailored for C. For
  196. # instance, some of the names that are used will be different. The list of all
  197. # members will be omitted, etc.
  198. # The default value is: NO.
  199. OPTIMIZE_OUTPUT_FOR_C = NO
  200. # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
  201. # Python sources only. Doxygen will then generate output that is more tailored
  202. # for that language. For instance, namespaces will be presented as packages,
  203. # qualified scopes will look different, etc.
  204. # The default value is: NO.
  205. OPTIMIZE_OUTPUT_JAVA = YES
  206. # Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
  207. # sources. Doxygen will then generate output that is tailored for Fortran.
  208. # The default value is: NO.
  209. OPTIMIZE_FOR_FORTRAN = NO
  210. # Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
  211. # sources. Doxygen will then generate output that is tailored for VHDL.
  212. # The default value is: NO.
  213. OPTIMIZE_OUTPUT_VHDL = NO
  214. # Doxygen selects the parser to use depending on the extension of the files it
  215. # parses. With this tag you can assign which parser to use for a given
  216. # extension. Doxygen has a built-in mapping, but you can override or extend it
  217. # using this tag. The format is ext=language, where ext is a file extension, and
  218. # language is one of the parsers supported by doxygen: IDL, Java, Javascript,
  219. # C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
  220. # FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
  221. # Fortran. In the later case the parser tries to guess whether the code is fixed
  222. # or free formatted code, this is the default for Fortran type files), VHDL. For
  223. # instance to make doxygen treat .inc files as Fortran files (default is PHP),
  224. # and .f files as C (default is Fortran), use: inc=Fortran f=C.
  225. #
  226. # Note: For files without extension you can use no_extension as a placeholder.
  227. #
  228. # Note that for custom extensions you also need to set FILE_PATTERNS otherwise
  229. # the files are not read by doxygen.
  230. EXTENSION_MAPPING =
  231. # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
  232. # according to the Markdown format, which allows for more readable
  233. # documentation. See http://daringfireball.net/projects/markdown/ for details.
  234. # The output of markdown processing is further processed by doxygen, so you can
  235. # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
  236. # case of backward compatibilities issues.
  237. # The default value is: YES.
  238. MARKDOWN_SUPPORT = YES
  239. # When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up
  240. # to that level are automatically included in the table of contents, even if
  241. # they do not have an id attribute.
  242. # Note: This feature currently applies only to Markdown headings.
  243. # Minimum value: 0, maximum value: 99, default value: 0.
  244. # This tag requires that the tag MARKDOWN_SUPPORT is set to YES.
  245. TOC_INCLUDE_HEADINGS = 0
  246. # When enabled doxygen tries to link words that correspond to documented
  247. # classes, or namespaces to their corresponding documentation. Such a link can
  248. # be prevented in individual cases by putting a % sign in front of the word or
  249. # globally by setting AUTOLINK_SUPPORT to NO.
  250. # The default value is: YES.
  251. AUTOLINK_SUPPORT = YES
  252. # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
  253. # to include (a tag file for) the STL sources as input, then you should set this
  254. # tag to YES in order to let doxygen match functions declarations and
  255. # definitions whose arguments contain STL classes (e.g. func(std::string);
  256. # versus func(std::string) {}). This also make the inheritance and collaboration
  257. # diagrams that involve STL classes more complete and accurate.
  258. # The default value is: NO.
  259. BUILTIN_STL_SUPPORT = NO
  260. # If you use Microsoft's C++/CLI language, you should set this option to YES to
  261. # enable parsing support.
  262. # The default value is: NO.
  263. CPP_CLI_SUPPORT = NO
  264. # Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
  265. # http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
  266. # will parse them like normal C++ but will assume all classes use public instead
  267. # of private inheritance when no explicit protection keyword is present.
  268. # The default value is: NO.
  269. SIP_SUPPORT = NO
  270. # For Microsoft's IDL there are propget and propput attributes to indicate
  271. # getter and setter methods for a property. Setting this option to YES will make
  272. # doxygen to replace the get and set methods by a property in the documentation.
  273. # This will only work if the methods are indeed getting or setting a simple
  274. # type. If this is not the case, or you want to show the methods anyway, you
  275. # should set this option to NO.
  276. # The default value is: YES.
  277. IDL_PROPERTY_SUPPORT = YES
  278. # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
  279. # tag is set to YES then doxygen will reuse the documentation of the first
  280. # member in the group (if any) for the other members of the group. By default
  281. # all members of a group must be documented explicitly.
  282. # The default value is: NO.
  283. DISTRIBUTE_GROUP_DOC = NO
  284. # If one adds a struct or class to a group and this option is enabled, then also
  285. # any nested class or struct is added to the same group. By default this option
  286. # is disabled and one has to add nested compounds explicitly via \ingroup.
  287. # The default value is: NO.
  288. GROUP_NESTED_COMPOUNDS = NO
  289. # Set the SUBGROUPING tag to YES to allow class member groups of the same type
  290. # (for instance a group of public functions) to be put as a subgroup of that
  291. # type (e.g. under the Public Functions section). Set it to NO to prevent
  292. # subgrouping. Alternatively, this can be done per class using the
  293. # \nosubgrouping command.
  294. # The default value is: YES.
  295. SUBGROUPING = YES
  296. # When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
  297. # are shown inside the group in which they are included (e.g. using \ingroup)
  298. # instead of on a separate page (for HTML and Man pages) or section (for LaTeX
  299. # and RTF).
  300. #
  301. # Note that this feature does not work in combination with
  302. # SEPARATE_MEMBER_PAGES.
  303. # The default value is: NO.
  304. INLINE_GROUPED_CLASSES = NO
  305. # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
  306. # with only public data fields or simple typedef fields will be shown inline in
  307. # the documentation of the scope in which they are defined (i.e. file,
  308. # namespace, or group documentation), provided this scope is documented. If set
  309. # to NO, structs, classes, and unions are shown on a separate page (for HTML and
  310. # Man pages) or section (for LaTeX and RTF).
  311. # The default value is: NO.
  312. INLINE_SIMPLE_STRUCTS = NO
  313. # When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
  314. # enum is documented as struct, union, or enum with the name of the typedef. So
  315. # typedef struct TypeS {} TypeT, will appear in the documentation as a struct
  316. # with name TypeT. When disabled the typedef will appear as a member of a file,
  317. # namespace, or class. And the struct will be named TypeS. This can typically be
  318. # useful for C code in case the coding convention dictates that all compound
  319. # types are typedef'ed and only the typedef is referenced, never the tag name.
  320. # The default value is: NO.
  321. TYPEDEF_HIDES_STRUCT = NO
  322. # The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
  323. # cache is used to resolve symbols given their name and scope. Since this can be
  324. # an expensive process and often the same symbol appears multiple times in the
  325. # code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
  326. # doxygen will become slower. If the cache is too large, memory is wasted. The
  327. # cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
  328. # is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
  329. # symbols. At the end of a run doxygen will report the cache usage and suggest
  330. # the optimal cache size from a speed point of view.
  331. # Minimum value: 0, maximum value: 9, default value: 0.
  332. LOOKUP_CACHE_SIZE = 0
  333. #---------------------------------------------------------------------------
  334. # Build related configuration options
  335. #---------------------------------------------------------------------------
  336. # If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
  337. # documentation are documented, even if no documentation was available. Private
  338. # class members and static file members will be hidden unless the
  339. # EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
  340. # Note: This will also disable the warnings about undocumented members that are
  341. # normally produced when WARNINGS is set to YES.
  342. # The default value is: NO.
  343. EXTRACT_ALL = YES
  344. # If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
  345. # be included in the documentation.
  346. # The default value is: NO.
  347. EXTRACT_PRIVATE = YES
  348. # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
  349. # scope will be included in the documentation.
  350. # The default value is: NO.
  351. EXTRACT_PACKAGE = YES
  352. # If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
  353. # included in the documentation.
  354. # The default value is: NO.
  355. EXTRACT_STATIC = YES
  356. # If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
  357. # locally in source files will be included in the documentation. If set to NO,
  358. # only classes defined in header files are included. Does not have any effect
  359. # for Java sources.
  360. # The default value is: YES.
  361. EXTRACT_LOCAL_CLASSES = YES
  362. # This flag is only useful for Objective-C code. If set to YES, local methods,
  363. # which are defined in the implementation section but not in the interface are
  364. # included in the documentation. If set to NO, only methods in the interface are
  365. # included.
  366. # The default value is: NO.
  367. EXTRACT_LOCAL_METHODS = YES
  368. # If this flag is set to YES, the members of anonymous namespaces will be
  369. # extracted and appear in the documentation as a namespace called
  370. # 'anonymous_namespace{file}', where file will be replaced with the base name of
  371. # the file that contains the anonymous namespace. By default anonymous namespace
  372. # are hidden.
  373. # The default value is: NO.
  374. EXTRACT_ANON_NSPACES = NO
  375. # If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
  376. # undocumented members inside documented classes or files. If set to NO these
  377. # members will be included in the various overviews, but no documentation
  378. # section is generated. This option has no effect if EXTRACT_ALL is enabled.
  379. # The default value is: NO.
  380. HIDE_UNDOC_MEMBERS = NO
  381. # If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
  382. # undocumented classes that are normally visible in the class hierarchy. If set
  383. # to NO, these classes will be included in the various overviews. This option
  384. # has no effect if EXTRACT_ALL is enabled.
  385. # The default value is: NO.
  386. HIDE_UNDOC_CLASSES = NO
  387. # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
  388. # (class|struct|union) declarations. If set to NO, these declarations will be
  389. # included in the documentation.
  390. # The default value is: NO.
  391. HIDE_FRIEND_COMPOUNDS = NO
  392. # If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
  393. # documentation blocks found inside the body of a function. If set to NO, these
  394. # blocks will be appended to the function's detailed documentation block.
  395. # The default value is: NO.
  396. HIDE_IN_BODY_DOCS = NO
  397. # The INTERNAL_DOCS tag determines if documentation that is typed after a
  398. # \internal command is included. If the tag is set to NO then the documentation
  399. # will be excluded. Set it to YES to include the internal documentation.
  400. # The default value is: NO.
  401. INTERNAL_DOCS = NO
  402. # If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
  403. # names in lower-case letters. If set to YES, upper-case letters are also
  404. # allowed. This is useful if you have classes or files whose names only differ
  405. # in case and if your file system supports case sensitive file names. Windows
  406. # and Mac users are advised to set this option to NO.
  407. # The default value is: system dependent.
  408. CASE_SENSE_NAMES = NO
  409. # If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
  410. # their full class and namespace scopes in the documentation. If set to YES, the
  411. # scope will be hidden.
  412. # The default value is: NO.
  413. HIDE_SCOPE_NAMES = NO
  414. # If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
  415. # append additional text to a page's title, such as Class Reference. If set to
  416. # YES the compound reference will be hidden.
  417. # The default value is: NO.
  418. HIDE_COMPOUND_REFERENCE= NO
  419. # If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
  420. # the files that are included by a file in the documentation of that file.
  421. # The default value is: YES.
  422. SHOW_INCLUDE_FILES = YES
  423. # If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
  424. # grouped member an include statement to the documentation, telling the reader
  425. # which file to include in order to use the member.
  426. # The default value is: NO.
  427. SHOW_GROUPED_MEMB_INC = NO
  428. # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
  429. # files with double quotes in the documentation rather than with sharp brackets.
  430. # The default value is: NO.
  431. FORCE_LOCAL_INCLUDES = NO
  432. # If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
  433. # documentation for inline members.
  434. # The default value is: YES.
  435. INLINE_INFO = YES
  436. # If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
  437. # (detailed) documentation of file and class members alphabetically by member
  438. # name. If set to NO, the members will appear in declaration order.
  439. # The default value is: YES.
  440. SORT_MEMBER_DOCS = YES
  441. # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
  442. # descriptions of file, namespace and class members alphabetically by member
  443. # name. If set to NO, the members will appear in declaration order. Note that
  444. # this will also influence the order of the classes in the class list.
  445. # The default value is: NO.
  446. SORT_BRIEF_DOCS = NO
  447. # If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
  448. # (brief and detailed) documentation of class members so that constructors and
  449. # destructors are listed first. If set to NO the constructors will appear in the
  450. # respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
  451. # Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
  452. # member documentation.
  453. # Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
  454. # detailed member documentation.
  455. # The default value is: NO.
  456. SORT_MEMBERS_CTORS_1ST = NO
  457. # If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
  458. # of group names into alphabetical order. If set to NO the group names will
  459. # appear in their defined order.
  460. # The default value is: NO.
  461. SORT_GROUP_NAMES = NO
  462. # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
  463. # fully-qualified names, including namespaces. If set to NO, the class list will
  464. # be sorted only by class name, not including the namespace part.
  465. # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
  466. # Note: This option applies only to the class list, not to the alphabetical
  467. # list.
  468. # The default value is: NO.
  469. SORT_BY_SCOPE_NAME = NO
  470. # If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
  471. # type resolution of all parameters of a function it will reject a match between
  472. # the prototype and the implementation of a member function even if there is
  473. # only one candidate or it is obvious which candidate to choose by doing a
  474. # simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
  475. # accept a match between prototype and implementation in such cases.
  476. # The default value is: NO.
  477. STRICT_PROTO_MATCHING = NO
  478. # The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
  479. # list. This list is created by putting \todo commands in the documentation.
  480. # The default value is: YES.
  481. GENERATE_TODOLIST = YES
  482. # The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
  483. # list. This list is created by putting \test commands in the documentation.
  484. # The default value is: YES.
  485. GENERATE_TESTLIST = YES
  486. # The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
  487. # list. This list is created by putting \bug commands in the documentation.
  488. # The default value is: YES.
  489. GENERATE_BUGLIST = YES
  490. # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
  491. # the deprecated list. This list is created by putting \deprecated commands in
  492. # the documentation.
  493. # The default value is: YES.
  494. GENERATE_DEPRECATEDLIST= YES
  495. # The ENABLED_SECTIONS tag can be used to enable conditional documentation
  496. # sections, marked by \if <section_label> ... \endif and \cond <section_label>
  497. # ... \endcond blocks.
  498. ENABLED_SECTIONS =
  499. # The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
  500. # initial value of a variable or macro / define can have for it to appear in the
  501. # documentation. If the initializer consists of more lines than specified here
  502. # it will be hidden. Use a value of 0 to hide initializers completely. The
  503. # appearance of the value of individual variables and macros / defines can be
  504. # controlled using \showinitializer or \hideinitializer command in the
  505. # documentation regardless of this setting.
  506. # Minimum value: 0, maximum value: 10000, default value: 30.
  507. MAX_INITIALIZER_LINES = 30
  508. # Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
  509. # the bottom of the documentation of classes and structs. If set to YES, the
  510. # list will mention the files that were used to generate the documentation.
  511. # The default value is: YES.
  512. SHOW_USED_FILES = YES
  513. # Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
  514. # will remove the Files entry from the Quick Index and from the Folder Tree View
  515. # (if specified).
  516. # The default value is: YES.
  517. SHOW_FILES = YES
  518. # Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
  519. # page. This will remove the Namespaces entry from the Quick Index and from the
  520. # Folder Tree View (if specified).
  521. # The default value is: YES.
  522. SHOW_NAMESPACES = YES
  523. # The FILE_VERSION_FILTER tag can be used to specify a program or script that
  524. # doxygen should invoke to get the current version for each file (typically from
  525. # the version control system). Doxygen will invoke the program by executing (via
  526. # popen()) the command command input-file, where command is the value of the
  527. # FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
  528. # by doxygen. Whatever the program writes to standard output is used as the file
  529. # version. For an example see the documentation.
  530. FILE_VERSION_FILTER =
  531. # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
  532. # by doxygen. The layout file controls the global structure of the generated
  533. # output files in an output format independent way. To create the layout file
  534. # that represents doxygen's defaults, run doxygen with the -l option. You can
  535. # optionally specify a file name after the option, if omitted DoxygenLayout.xml
  536. # will be used as the name of the layout file.
  537. #
  538. # Note that if you run doxygen from a directory containing a file called
  539. # DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
  540. # tag is left empty.
  541. LAYOUT_FILE =
  542. # The CITE_BIB_FILES tag can be used to specify one or more bib files containing
  543. # the reference definitions. This must be a list of .bib files. The .bib
  544. # extension is automatically appended if omitted. This requires the bibtex tool
  545. # to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
  546. # For LaTeX the style of the bibliography can be controlled using
  547. # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
  548. # search path. See also \cite for info how to create references.
  549. CITE_BIB_FILES =
  550. #---------------------------------------------------------------------------
  551. # Configuration options related to warning and progress messages
  552. #---------------------------------------------------------------------------
  553. # The QUIET tag can be used to turn on/off the messages that are generated to
  554. # standard output by doxygen. If QUIET is set to YES this implies that the
  555. # messages are off.
  556. # The default value is: NO.
  557. QUIET = NO
  558. # The WARNINGS tag can be used to turn on/off the warning messages that are
  559. # generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
  560. # this implies that the warnings are on.
  561. #
  562. # Tip: Turn warnings on while writing the documentation.
  563. # The default value is: YES.
  564. WARNINGS = YES
  565. # If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
  566. # warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
  567. # will automatically be disabled.
  568. # The default value is: YES.
  569. WARN_IF_UNDOCUMENTED = YES
  570. # If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
  571. # potential errors in the documentation, such as not documenting some parameters
  572. # in a documented function, or documenting parameters that don't exist or using
  573. # markup commands wrongly.
  574. # The default value is: YES.
  575. WARN_IF_DOC_ERROR = YES
  576. # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
  577. # are documented, but have no documentation for their parameters or return
  578. # value. If set to NO, doxygen will only warn about wrong or incomplete
  579. # parameter documentation, but not about the absence of documentation.
  580. # The default value is: NO.
  581. WARN_NO_PARAMDOC = NO
  582. # If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when
  583. # a warning is encountered.
  584. # The default value is: NO.
  585. WARN_AS_ERROR = NO
  586. # The WARN_FORMAT tag determines the format of the warning messages that doxygen
  587. # can produce. The string should contain the $file, $line, and $text tags, which
  588. # will be replaced by the file and line number from which the warning originated
  589. # and the warning text. Optionally the format may contain $version, which will
  590. # be replaced by the version of the file (if it could be obtained via
  591. # FILE_VERSION_FILTER)
  592. # The default value is: $file:$line: $text.
  593. WARN_FORMAT = "$file:$line: $text"
  594. # The WARN_LOGFILE tag can be used to specify a file to which warning and error
  595. # messages should be written. If left blank the output is written to standard
  596. # error (stderr).
  597. WARN_LOGFILE =
  598. #---------------------------------------------------------------------------
  599. # Configuration options related to the input files
  600. #---------------------------------------------------------------------------
  601. # The INPUT tag is used to specify the files and/or directories that contain
  602. # documented source files. You may enter file names like myfile.cpp or
  603. # directories like /usr/src/myproject. Separate the files or directories with
  604. # spaces. See also FILE_PATTERNS and EXTENSION_MAPPING
  605. # Note: If this tag is empty the current directory is searched.
  606. INPUT = src
  607. # This tag can be used to specify the character encoding of the source files
  608. # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
  609. # libiconv (or the iconv built into libc) for the transcoding. See the libiconv
  610. # documentation (see: http://www.gnu.org/software/libiconv) for the list of
  611. # possible encodings.
  612. # The default value is: UTF-8.
  613. INPUT_ENCODING = UTF-8
  614. # If the value of the INPUT tag contains directories, you can use the
  615. # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
  616. # *.h) to filter out the source-files in the directories.
  617. #
  618. # Note that for custom extensions or not directly supported extensions you also
  619. # need to set EXTENSION_MAPPING for the extension otherwise the files are not
  620. # read by doxygen.
  621. #
  622. # If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp,
  623. # *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h,
  624. # *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc,
  625. # *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08,
  626. # *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf and *.qsf.
  627. FILE_PATTERNS = *.c \
  628. *.cc \
  629. *.cxx \
  630. *.cpp \
  631. *.c++ \
  632. *.java \
  633. *.ii \
  634. *.ixx \
  635. *.ipp \
  636. *.i++ \
  637. *.inl \
  638. *.idl \
  639. *.ddl \
  640. *.odl \
  641. *.h \
  642. *.hh \
  643. *.hxx \
  644. *.hpp \
  645. *.h++ \
  646. *.cs \
  647. *.d \
  648. *.php \
  649. *.php4 \
  650. *.php5 \
  651. *.phtml \
  652. *.inc \
  653. *.m \
  654. *.markdown \
  655. *.md \
  656. *.mm \
  657. *.dox \
  658. *.py \
  659. *.pyw \
  660. *.f90 \
  661. *.f95 \
  662. *.f03 \
  663. *.f08 \
  664. *.f \
  665. *.for \
  666. *.tcl \
  667. *.vhd \
  668. *.vhdl \
  669. *.ucf \
  670. *.qsf
  671. # The RECURSIVE tag can be used to specify whether or not subdirectories should
  672. # be searched for input files as well.
  673. # The default value is: NO.
  674. RECURSIVE = YES
  675. # The EXCLUDE tag can be used to specify files and/or directories that should be
  676. # excluded from the INPUT source files. This way you can easily exclude a
  677. # subdirectory from a directory tree whose root is specified with the INPUT tag.
  678. #
  679. # Note that relative paths are relative to the directory from which doxygen is
  680. # run.
  681. EXCLUDE =
  682. # The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
  683. # directories that are symbolic links (a Unix file system feature) are excluded
  684. # from the input.
  685. # The default value is: NO.
  686. EXCLUDE_SYMLINKS = NO
  687. # If the value of the INPUT tag contains directories, you can use the
  688. # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
  689. # certain files from those directories.
  690. #
  691. # Note that the wildcards are matched against the file with absolute path, so to
  692. # exclude all test directories for example use the pattern */test/*
  693. EXCLUDE_PATTERNS =
  694. # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
  695. # (namespaces, classes, functions, etc.) that should be excluded from the
  696. # output. The symbol name can be a fully qualified name, a word, or if the
  697. # wildcard * is used, a substring. Examples: ANamespace, AClass,
  698. # AClass::ANamespace, ANamespace::*Test
  699. #
  700. # Note that the wildcards are matched against the file with absolute path, so to
  701. # exclude all test directories use the pattern */test/*
  702. EXCLUDE_SYMBOLS =
  703. # The EXAMPLE_PATH tag can be used to specify one or more files or directories
  704. # that contain example code fragments that are included (see the \include
  705. # command).
  706. EXAMPLE_PATH =
  707. # If the value of the EXAMPLE_PATH tag contains directories, you can use the
  708. # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
  709. # *.h) to filter out the source-files in the directories. If left blank all
  710. # files are included.
  711. EXAMPLE_PATTERNS = *
  712. # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
  713. # searched for input files to be used with the \include or \dontinclude commands
  714. # irrespective of the value of the RECURSIVE tag.
  715. # The default value is: NO.
  716. EXAMPLE_RECURSIVE = NO
  717. # The IMAGE_PATH tag can be used to specify one or more files or directories
  718. # that contain images that are to be included in the documentation (see the
  719. # \image command).
  720. IMAGE_PATH =
  721. # The INPUT_FILTER tag can be used to specify a program that doxygen should
  722. # invoke to filter for each input file. Doxygen will invoke the filter program
  723. # by executing (via popen()) the command:
  724. #
  725. # <filter> <input-file>
  726. #
  727. # where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
  728. # name of an input file. Doxygen will then use the output that the filter
  729. # program writes to standard output. If FILTER_PATTERNS is specified, this tag
  730. # will be ignored.
  731. #
  732. # Note that the filter must not add or remove lines; it is applied before the
  733. # code is scanned, but not when the output code is generated. If lines are added
  734. # or removed, the anchors will not be placed correctly.
  735. #
  736. # Note that for custom extensions or not directly supported extensions you also
  737. # need to set EXTENSION_MAPPING for the extension otherwise the files are not
  738. # properly processed by doxygen.
  739. INPUT_FILTER =
  740. # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
  741. # basis. Doxygen will compare the file name with each pattern and apply the
  742. # filter if there is a match. The filters are a list of the form: pattern=filter
  743. # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
  744. # filters are used. If the FILTER_PATTERNS tag is empty or if none of the
  745. # patterns match the file name, INPUT_FILTER is applied.
  746. #
  747. # Note that for custom extensions or not directly supported extensions you also
  748. # need to set EXTENSION_MAPPING for the extension otherwise the files are not
  749. # properly processed by doxygen.
  750. FILTER_PATTERNS =
  751. # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
  752. # INPUT_FILTER) will also be used to filter the input files that are used for
  753. # producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
  754. # The default value is: NO.
  755. FILTER_SOURCE_FILES = NO
  756. # The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
  757. # pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
  758. # it is also possible to disable source filtering for a specific pattern using
  759. # *.ext= (so without naming a filter).
  760. # This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
  761. FILTER_SOURCE_PATTERNS =
  762. # If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
  763. # is part of the input, its contents will be placed on the main page
  764. # (index.html). This can be useful if you have a project on for instance GitHub
  765. # and want to reuse the introduction page also for the doxygen output.
  766. USE_MDFILE_AS_MAINPAGE =
  767. #---------------------------------------------------------------------------
  768. # Configuration options related to source browsing
  769. #---------------------------------------------------------------------------
  770. # If the SOURCE_BROWSER tag is set to YES then a list of source files will be
  771. # generated. Documented entities will be cross-referenced with these sources.
  772. #
  773. # Note: To get rid of all source code in the generated output, make sure that
  774. # also VERBATIM_HEADERS is set to NO.
  775. # The default value is: NO.
  776. SOURCE_BROWSER = YES
  777. # Setting the INLINE_SOURCES tag to YES will include the body of functions,
  778. # classes and enums directly into the documentation.
  779. # The default value is: NO.
  780. INLINE_SOURCES = NO
  781. # Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
  782. # special comment blocks from generated source code fragments. Normal C, C++ and
  783. # Fortran comments will always remain visible.
  784. # The default value is: YES.
  785. STRIP_CODE_COMMENTS = YES
  786. # If the REFERENCED_BY_RELATION tag is set to YES then for each documented
  787. # function all documented functions referencing it will be listed.
  788. # The default value is: NO.
  789. REFERENCED_BY_RELATION = NO
  790. # If the REFERENCES_RELATION tag is set to YES then for each documented function
  791. # all documented entities called/used by that function will be listed.
  792. # The default value is: NO.
  793. REFERENCES_RELATION = NO
  794. # If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
  795. # to YES then the hyperlinks from functions in REFERENCES_RELATION and
  796. # REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
  797. # link to the documentation.
  798. # The default value is: YES.
  799. REFERENCES_LINK_SOURCE = YES
  800. # If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
  801. # source code will show a tooltip with additional information such as prototype,
  802. # brief description and links to the definition and documentation. Since this
  803. # will make the HTML file larger and loading of large files a bit slower, you
  804. # can opt to disable this feature.
  805. # The default value is: YES.
  806. # This tag requires that the tag SOURCE_BROWSER is set to YES.
  807. SOURCE_TOOLTIPS = YES
  808. # If the USE_HTAGS tag is set to YES then the references to source code will
  809. # point to the HTML generated by the htags(1) tool instead of doxygen built-in
  810. # source browser. The htags tool is part of GNU's global source tagging system
  811. # (see http://www.gnu.org/software/global/global.html). You will need version
  812. # 4.8.6 or higher.
  813. #
  814. # To use it do the following:
  815. # - Install the latest version of global
  816. # - Enable SOURCE_BROWSER and USE_HTAGS in the config file
  817. # - Make sure the INPUT points to the root of the source tree
  818. # - Run doxygen as normal
  819. #
  820. # Doxygen will invoke htags (and that will in turn invoke gtags), so these
  821. # tools must be available from the command line (i.e. in the search path).
  822. #
  823. # The result: instead of the source browser generated by doxygen, the links to
  824. # source code will now point to the output of htags.
  825. # The default value is: NO.
  826. # This tag requires that the tag SOURCE_BROWSER is set to YES.
  827. USE_HTAGS = NO
  828. # If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
  829. # verbatim copy of the header file for each class for which an include is
  830. # specified. Set to NO to disable this.
  831. # See also: Section \class.
  832. # The default value is: YES.
  833. VERBATIM_HEADERS = YES
  834. # If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
  835. # clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
  836. # cost of reduced performance. This can be particularly helpful with template
  837. # rich C++ code for which doxygen's built-in parser lacks the necessary type
  838. # information.
  839. # Note: The availability of this option depends on whether or not doxygen was
  840. # generated with the -Duse-libclang=ON option for CMake.
  841. # The default value is: NO.
  842. CLANG_ASSISTED_PARSING = NO
  843. # If clang assisted parsing is enabled you can provide the compiler with command
  844. # line options that you would normally use when invoking the compiler. Note that
  845. # the include paths will already be set by doxygen for the files and directories
  846. # specified with INPUT and INCLUDE_PATH.
  847. # This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
  848. CLANG_OPTIONS =
  849. #---------------------------------------------------------------------------
  850. # Configuration options related to the alphabetical class index
  851. #---------------------------------------------------------------------------
  852. # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
  853. # compounds will be generated. Enable this if the project contains a lot of
  854. # classes, structs, unions or interfaces.
  855. # The default value is: YES.
  856. ALPHABETICAL_INDEX = YES
  857. # The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
  858. # which the alphabetical index list will be split.
  859. # Minimum value: 1, maximum value: 20, default value: 5.
  860. # This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
  861. COLS_IN_ALPHA_INDEX = 5
  862. # In case all classes in a project start with a common prefix, all classes will
  863. # be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
  864. # can be used to specify a prefix (or a list of prefixes) that should be ignored
  865. # while generating the index headers.
  866. # This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
  867. IGNORE_PREFIX =
  868. #---------------------------------------------------------------------------
  869. # Configuration options related to the HTML output
  870. #---------------------------------------------------------------------------
  871. # If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
  872. # The default value is: YES.
  873. GENERATE_HTML = YES
  874. # The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
  875. # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
  876. # it.
  877. # The default directory is: html.
  878. # This tag requires that the tag GENERATE_HTML is set to YES.
  879. HTML_OUTPUT = html
  880. # The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
  881. # generated HTML page (for example: .htm, .php, .asp).
  882. # The default value is: .html.
  883. # This tag requires that the tag GENERATE_HTML is set to YES.
  884. HTML_FILE_EXTENSION = .html
  885. # The HTML_HEADER tag can be used to specify a user-defined HTML header file for
  886. # each generated HTML page. If the tag is left blank doxygen will generate a
  887. # standard header.
  888. #
  889. # To get valid HTML the header file that includes any scripts and style sheets
  890. # that doxygen needs, which is dependent on the configuration options used (e.g.
  891. # the setting GENERATE_TREEVIEW). It is highly recommended to start with a
  892. # default header using
  893. # doxygen -w html new_header.html new_footer.html new_stylesheet.css
  894. # YourConfigFile
  895. # and then modify the file new_header.html. See also section "Doxygen usage"
  896. # for information on how to generate the default header that doxygen normally
  897. # uses.
  898. # Note: The header is subject to change so you typically have to regenerate the
  899. # default header when upgrading to a newer version of doxygen. For a description
  900. # of the possible markers and block names see the documentation.
  901. # This tag requires that the tag GENERATE_HTML is set to YES.
  902. HTML_HEADER =
  903. # The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
  904. # generated HTML page. If the tag is left blank doxygen will generate a standard
  905. # footer. See HTML_HEADER for more information on how to generate a default
  906. # footer and what special commands can be used inside the footer. See also
  907. # section "Doxygen usage" for information on how to generate the default footer
  908. # that doxygen normally uses.
  909. # This tag requires that the tag GENERATE_HTML is set to YES.
  910. HTML_FOOTER =
  911. # The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
  912. # sheet that is used by each HTML page. It can be used to fine-tune the look of
  913. # the HTML output. If left blank doxygen will generate a default style sheet.
  914. # See also section "Doxygen usage" for information on how to generate the style
  915. # sheet that doxygen normally uses.
  916. # Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
  917. # it is more robust and this tag (HTML_STYLESHEET) will in the future become
  918. # obsolete.
  919. # This tag requires that the tag GENERATE_HTML is set to YES.
  920. HTML_STYLESHEET =
  921. # The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
  922. # cascading style sheets that are included after the standard style sheets
  923. # created by doxygen. Using this option one can overrule certain style aspects.
  924. # This is preferred over using HTML_STYLESHEET since it does not replace the
  925. # standard style sheet and is therefore more robust against future updates.
  926. # Doxygen will copy the style sheet files to the output directory.
  927. # Note: The order of the extra style sheet files is of importance (e.g. the last
  928. # style sheet in the list overrules the setting of the previous ones in the
  929. # list). For an example see the documentation.
  930. # This tag requires that the tag GENERATE_HTML is set to YES.
  931. HTML_EXTRA_STYLESHEET =
  932. # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
  933. # other source files which should be copied to the HTML output directory. Note
  934. # that these files will be copied to the base HTML output directory. Use the
  935. # $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
  936. # files. In the HTML_STYLESHEET file, use the file name only. Also note that the
  937. # files will be copied as-is; there are no commands or markers available.
  938. # This tag requires that the tag GENERATE_HTML is set to YES.
  939. HTML_EXTRA_FILES =
  940. # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
  941. # will adjust the colors in the style sheet and background images according to
  942. # this color. Hue is specified as an angle on a colorwheel, see
  943. # http://en.wikipedia.org/wiki/Hue for more information. For instance the value
  944. # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
  945. # purple, and 360 is red again.
  946. # Minimum value: 0, maximum value: 359, default value: 220.
  947. # This tag requires that the tag GENERATE_HTML is set to YES.
  948. HTML_COLORSTYLE_HUE = 220
  949. # The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
  950. # in the HTML output. For a value of 0 the output will use grayscales only. A
  951. # value of 255 will produce the most vivid colors.
  952. # Minimum value: 0, maximum value: 255, default value: 100.
  953. # This tag requires that the tag GENERATE_HTML is set to YES.
  954. HTML_COLORSTYLE_SAT = 100
  955. # The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
  956. # luminance component of the colors in the HTML output. Values below 100
  957. # gradually make the output lighter, whereas values above 100 make the output
  958. # darker. The value divided by 100 is the actual gamma applied, so 80 represents
  959. # a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
  960. # change the gamma.
  961. # Minimum value: 40, maximum value: 240, default value: 80.
  962. # This tag requires that the tag GENERATE_HTML is set to YES.
  963. HTML_COLORSTYLE_GAMMA = 80
  964. # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
  965. # page will contain the date and time when the page was generated. Setting this
  966. # to YES can help to show when doxygen was last run and thus if the
  967. # documentation is up to date.
  968. # The default value is: NO.
  969. # This tag requires that the tag GENERATE_HTML is set to YES.
  970. HTML_TIMESTAMP = NO
  971. # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
  972. # documentation will contain sections that can be hidden and shown after the
  973. # page has loaded.
  974. # The default value is: NO.
  975. # This tag requires that the tag GENERATE_HTML is set to YES.
  976. HTML_DYNAMIC_SECTIONS = NO
  977. # With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
  978. # shown in the various tree structured indices initially; the user can expand
  979. # and collapse entries dynamically later on. Doxygen will expand the tree to
  980. # such a level that at most the specified number of entries are visible (unless
  981. # a fully collapsed tree already exceeds this amount). So setting the number of
  982. # entries 1 will produce a full collapsed tree by default. 0 is a special value
  983. # representing an infinite number of entries and will result in a full expanded
  984. # tree by default.
  985. # Minimum value: 0, maximum value: 9999, default value: 100.
  986. # This tag requires that the tag GENERATE_HTML is set to YES.
  987. HTML_INDEX_NUM_ENTRIES = 100
  988. # If the GENERATE_DOCSET tag is set to YES, additional index files will be
  989. # generated that can be used as input for Apple's Xcode 3 integrated development
  990. # environment (see: http://developer.apple.com/tools/xcode/), introduced with
  991. # OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
  992. # Makefile in the HTML output directory. Running make will produce the docset in
  993. # that directory and running make install will install the docset in
  994. # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
  995. # startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
  996. # for more information.
  997. # The default value is: NO.
  998. # This tag requires that the tag GENERATE_HTML is set to YES.
  999. GENERATE_DOCSET = NO
  1000. # This tag determines the name of the docset feed. A documentation feed provides
  1001. # an umbrella under which multiple documentation sets from a single provider
  1002. # (such as a company or product suite) can be grouped.
  1003. # The default value is: Doxygen generated docs.
  1004. # This tag requires that the tag GENERATE_DOCSET is set to YES.
  1005. DOCSET_FEEDNAME = "Doxygen generated docs"
  1006. # This tag specifies a string that should uniquely identify the documentation
  1007. # set bundle. This should be a reverse domain-name style string, e.g.
  1008. # com.mycompany.MyDocSet. Doxygen will append .docset to the name.
  1009. # The default value is: org.doxygen.Project.
  1010. # This tag requires that the tag GENERATE_DOCSET is set to YES.
  1011. DOCSET_BUNDLE_ID = org.doxygen.Project
  1012. # The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
  1013. # the documentation publisher. This should be a reverse domain-name style
  1014. # string, e.g. com.mycompany.MyDocSet.documentation.
  1015. # The default value is: org.doxygen.Publisher.
  1016. # This tag requires that the tag GENERATE_DOCSET is set to YES.
  1017. DOCSET_PUBLISHER_ID = org.doxygen.Publisher
  1018. # The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
  1019. # The default value is: Publisher.
  1020. # This tag requires that the tag GENERATE_DOCSET is set to YES.
  1021. DOCSET_PUBLISHER_NAME = Publisher
  1022. # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
  1023. # additional HTML index files: index.hhp, index.hhc, and index.hhk. The
  1024. # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
  1025. # (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
  1026. # Windows.
  1027. #
  1028. # The HTML Help Workshop contains a compiler that can convert all HTML output
  1029. # generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
  1030. # files are now used as the Windows 98 help format, and will replace the old
  1031. # Windows help format (.hlp) on all Windows platforms in the future. Compressed
  1032. # HTML files also contain an index, a table of contents, and you can search for
  1033. # words in the documentation. The HTML workshop also contains a viewer for
  1034. # compressed HTML files.
  1035. # The default value is: NO.
  1036. # This tag requires that the tag GENERATE_HTML is set to YES.
  1037. GENERATE_HTMLHELP = NO
  1038. # The CHM_FILE tag can be used to specify the file name of the resulting .chm
  1039. # file. You can add a path in front of the file if the result should not be
  1040. # written to the html output directory.
  1041. # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
  1042. CHM_FILE =
  1043. # The HHC_LOCATION tag can be used to specify the location (absolute path
  1044. # including file name) of the HTML help compiler (hhc.exe). If non-empty,
  1045. # doxygen will try to run the HTML help compiler on the generated index.hhp.
  1046. # The file has to be specified with full path.
  1047. # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
  1048. HHC_LOCATION =
  1049. # The GENERATE_CHI flag controls if a separate .chi index file is generated
  1050. # (YES) or that it should be included in the master .chm file (NO).
  1051. # The default value is: NO.
  1052. # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
  1053. GENERATE_CHI = NO
  1054. # The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
  1055. # and project file content.
  1056. # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
  1057. CHM_INDEX_ENCODING =
  1058. # The BINARY_TOC flag controls whether a binary table of contents is generated
  1059. # (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
  1060. # enables the Previous and Next buttons.
  1061. # The default value is: NO.
  1062. # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
  1063. BINARY_TOC = NO
  1064. # The TOC_EXPAND flag can be set to YES to add extra items for group members to
  1065. # the table of contents of the HTML help documentation and to the tree view.
  1066. # The default value is: NO.
  1067. # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
  1068. TOC_EXPAND = NO
  1069. # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
  1070. # QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
  1071. # can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
  1072. # (.qch) of the generated HTML documentation.
  1073. # The default value is: NO.
  1074. # This tag requires that the tag GENERATE_HTML is set to YES.
  1075. GENERATE_QHP = NO
  1076. # If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
  1077. # the file name of the resulting .qch file. The path specified is relative to
  1078. # the HTML output folder.
  1079. # This tag requires that the tag GENERATE_QHP is set to YES.
  1080. QCH_FILE =
  1081. # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
  1082. # Project output. For more information please see Qt Help Project / Namespace
  1083. # (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
  1084. # The default value is: org.doxygen.Project.
  1085. # This tag requires that the tag GENERATE_QHP is set to YES.
  1086. QHP_NAMESPACE = org.doxygen.Project
  1087. # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
  1088. # Help Project output. For more information please see Qt Help Project / Virtual
  1089. # Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
  1090. # folders).
  1091. # The default value is: doc.
  1092. # This tag requires that the tag GENERATE_QHP is set to YES.
  1093. QHP_VIRTUAL_FOLDER = doc
  1094. # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
  1095. # filter to add. For more information please see Qt Help Project / Custom
  1096. # Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
  1097. # filters).
  1098. # This tag requires that the tag GENERATE_QHP is set to YES.
  1099. QHP_CUST_FILTER_NAME =
  1100. # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
  1101. # custom filter to add. For more information please see Qt Help Project / Custom
  1102. # Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
  1103. # filters).
  1104. # This tag requires that the tag GENERATE_QHP is set to YES.
  1105. QHP_CUST_FILTER_ATTRS =
  1106. # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
  1107. # project's filter section matches. Qt Help Project / Filter Attributes (see:
  1108. # http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
  1109. # This tag requires that the tag GENERATE_QHP is set to YES.
  1110. QHP_SECT_FILTER_ATTRS =
  1111. # The QHG_LOCATION tag can be used to specify the location of Qt's
  1112. # qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
  1113. # generated .qhp file.
  1114. # This tag requires that the tag GENERATE_QHP is set to YES.
  1115. QHG_LOCATION =
  1116. # If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
  1117. # generated, together with the HTML files, they form an Eclipse help plugin. To
  1118. # install this plugin and make it available under the help contents menu in
  1119. # Eclipse, the contents of the directory containing the HTML and XML files needs
  1120. # to be copied into the plugins directory of eclipse. The name of the directory
  1121. # within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
  1122. # After copying Eclipse needs to be restarted before the help appears.
  1123. # The default value is: NO.
  1124. # This tag requires that the tag GENERATE_HTML is set to YES.
  1125. GENERATE_ECLIPSEHELP = NO
  1126. # A unique identifier for the Eclipse help plugin. When installing the plugin
  1127. # the directory name containing the HTML and XML files should also have this
  1128. # name. Each documentation set should have its own identifier.
  1129. # The default value is: org.doxygen.Project.
  1130. # This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
  1131. ECLIPSE_DOC_ID = org.doxygen.Project
  1132. # If you want full control over the layout of the generated HTML pages it might
  1133. # be necessary to disable the index and replace it with your own. The
  1134. # DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
  1135. # of each HTML page. A value of NO enables the index and the value YES disables
  1136. # it. Since the tabs in the index contain the same information as the navigation
  1137. # tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
  1138. # The default value is: NO.
  1139. # This tag requires that the tag GENERATE_HTML is set to YES.
  1140. DISABLE_INDEX = NO
  1141. # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
  1142. # structure should be generated to display hierarchical information. If the tag
  1143. # value is set to YES, a side panel will be generated containing a tree-like
  1144. # index structure (just like the one that is generated for HTML Help). For this
  1145. # to work a browser that supports JavaScript, DHTML, CSS and frames is required
  1146. # (i.e. any modern browser). Windows users are probably better off using the
  1147. # HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
  1148. # further fine-tune the look of the index. As an example, the default style
  1149. # sheet generated by doxygen has an example that shows how to put an image at
  1150. # the root of the tree instead of the PROJECT_NAME. Since the tree basically has
  1151. # the same information as the tab index, you could consider setting
  1152. # DISABLE_INDEX to YES when enabling this option.
  1153. # The default value is: NO.
  1154. # This tag requires that the tag GENERATE_HTML is set to YES.
  1155. GENERATE_TREEVIEW = YES
  1156. # The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
  1157. # doxygen will group on one line in the generated HTML documentation.
  1158. #
  1159. # Note that a value of 0 will completely suppress the enum values from appearing
  1160. # in the overview section.
  1161. # Minimum value: 0, maximum value: 20, default value: 4.
  1162. # This tag requires that the tag GENERATE_HTML is set to YES.
  1163. ENUM_VALUES_PER_LINE = 4
  1164. # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
  1165. # to set the initial width (in pixels) of the frame in which the tree is shown.
  1166. # Minimum value: 0, maximum value: 1500, default value: 250.
  1167. # This tag requires that the tag GENERATE_HTML is set to YES.
  1168. TREEVIEW_WIDTH = 250
  1169. # If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
  1170. # external symbols imported via tag files in a separate window.
  1171. # The default value is: NO.
  1172. # This tag requires that the tag GENERATE_HTML is set to YES.
  1173. EXT_LINKS_IN_WINDOW = NO
  1174. # Use this tag to change the font size of LaTeX formulas included as images in
  1175. # the HTML documentation. When you change the font size after a successful
  1176. # doxygen run you need to manually remove any form_*.png images from the HTML
  1177. # output directory to force them to be regenerated.
  1178. # Minimum value: 8, maximum value: 50, default value: 10.
  1179. # This tag requires that the tag GENERATE_HTML is set to YES.
  1180. FORMULA_FONTSIZE = 10
  1181. # Use the FORMULA_TRANPARENT tag to determine whether or not the images
  1182. # generated for formulas are transparent PNGs. Transparent PNGs are not
  1183. # supported properly for IE 6.0, but are supported on all modern browsers.
  1184. #
  1185. # Note that when changing this option you need to delete any form_*.png files in
  1186. # the HTML output directory before the changes have effect.
  1187. # The default value is: YES.
  1188. # This tag requires that the tag GENERATE_HTML is set to YES.
  1189. FORMULA_TRANSPARENT = YES
  1190. # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
  1191. # http://www.mathjax.org) which uses client side Javascript for the rendering
  1192. # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
  1193. # installed or if you want to formulas look prettier in the HTML output. When
  1194. # enabled you may also need to install MathJax separately and configure the path
  1195. # to it using the MATHJAX_RELPATH option.
  1196. # The default value is: NO.
  1197. # This tag requires that the tag GENERATE_HTML is set to YES.
  1198. USE_MATHJAX = NO
  1199. # When MathJax is enabled you can set the default output format to be used for
  1200. # the MathJax output. See the MathJax site (see:
  1201. # http://docs.mathjax.org/en/latest/output.html) for more details.
  1202. # Possible values are: HTML-CSS (which is slower, but has the best
  1203. # compatibility), NativeMML (i.e. MathML) and SVG.
  1204. # The default value is: HTML-CSS.
  1205. # This tag requires that the tag USE_MATHJAX is set to YES.
  1206. MATHJAX_FORMAT = HTML-CSS
  1207. # When MathJax is enabled you need to specify the location relative to the HTML
  1208. # output directory using the MATHJAX_RELPATH option. The destination directory
  1209. # should contain the MathJax.js script. For instance, if the mathjax directory
  1210. # is located at the same level as the HTML output directory, then
  1211. # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
  1212. # Content Delivery Network so you can quickly see the result without installing
  1213. # MathJax. However, it is strongly recommended to install a local copy of
  1214. # MathJax from http://www.mathjax.org before deployment.
  1215. # The default value is: http://cdn.mathjax.org/mathjax/latest.
  1216. # This tag requires that the tag USE_MATHJAX is set to YES.
  1217. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest
  1218. # The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
  1219. # extension names that should be enabled during MathJax rendering. For example
  1220. # MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
  1221. # This tag requires that the tag USE_MATHJAX is set to YES.
  1222. MATHJAX_EXTENSIONS =
  1223. # The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
  1224. # of code that will be used on startup of the MathJax code. See the MathJax site
  1225. # (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
  1226. # example see the documentation.
  1227. # This tag requires that the tag USE_MATHJAX is set to YES.
  1228. MATHJAX_CODEFILE =
  1229. # When the SEARCHENGINE tag is enabled doxygen will generate a search box for
  1230. # the HTML output. The underlying search engine uses javascript and DHTML and
  1231. # should work on any modern browser. Note that when using HTML help
  1232. # (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
  1233. # there is already a search function so this one should typically be disabled.
  1234. # For large projects the javascript based search engine can be slow, then
  1235. # enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
  1236. # search using the keyboard; to jump to the search box use <access key> + S
  1237. # (what the <access key> is depends on the OS and browser, but it is typically
  1238. # <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
  1239. # key> to jump into the search results window, the results can be navigated
  1240. # using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
  1241. # the search. The filter options can be selected when the cursor is inside the
  1242. # search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
  1243. # to select a filter and <Enter> or <escape> to activate or cancel the filter
  1244. # option.
  1245. # The default value is: YES.
  1246. # This tag requires that the tag GENERATE_HTML is set to YES.
  1247. SEARCHENGINE = YES
  1248. # When the SERVER_BASED_SEARCH tag is enabled the search engine will be
  1249. # implemented using a web server instead of a web client using Javascript. There
  1250. # are two flavors of web server based searching depending on the EXTERNAL_SEARCH
  1251. # setting. When disabled, doxygen will generate a PHP script for searching and
  1252. # an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
  1253. # and searching needs to be provided by external tools. See the section
  1254. # "External Indexing and Searching" for details.
  1255. # The default value is: NO.
  1256. # This tag requires that the tag SEARCHENGINE is set to YES.
  1257. SERVER_BASED_SEARCH = NO
  1258. # When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
  1259. # script for searching. Instead the search results are written to an XML file
  1260. # which needs to be processed by an external indexer. Doxygen will invoke an
  1261. # external search engine pointed to by the SEARCHENGINE_URL option to obtain the
  1262. # search results.
  1263. #
  1264. # Doxygen ships with an example indexer (doxyindexer) and search engine
  1265. # (doxysearch.cgi) which are based on the open source search engine library
  1266. # Xapian (see: http://xapian.org/).
  1267. #
  1268. # See the section "External Indexing and Searching" for details.
  1269. # The default value is: NO.
  1270. # This tag requires that the tag SEARCHENGINE is set to YES.
  1271. EXTERNAL_SEARCH = NO
  1272. # The SEARCHENGINE_URL should point to a search engine hosted by a web server
  1273. # which will return the search results when EXTERNAL_SEARCH is enabled.
  1274. #
  1275. # Doxygen ships with an example indexer (doxyindexer) and search engine
  1276. # (doxysearch.cgi) which are based on the open source search engine library
  1277. # Xapian (see: http://xapian.org/). See the section "External Indexing and
  1278. # Searching" for details.
  1279. # This tag requires that the tag SEARCHENGINE is set to YES.
  1280. SEARCHENGINE_URL =
  1281. # When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
  1282. # search data is written to a file for indexing by an external tool. With the
  1283. # SEARCHDATA_FILE tag the name of this file can be specified.
  1284. # The default file is: searchdata.xml.
  1285. # This tag requires that the tag SEARCHENGINE is set to YES.
  1286. SEARCHDATA_FILE = searchdata.xml
  1287. # When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
  1288. # EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
  1289. # useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
  1290. # projects and redirect the results back to the right project.
  1291. # This tag requires that the tag SEARCHENGINE is set to YES.
  1292. EXTERNAL_SEARCH_ID =
  1293. # The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
  1294. # projects other than the one defined by this configuration file, but that are
  1295. # all added to the same external search index. Each project needs to have a
  1296. # unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
  1297. # to a relative location where the documentation can be found. The format is:
  1298. # EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
  1299. # This tag requires that the tag SEARCHENGINE is set to YES.
  1300. EXTRA_SEARCH_MAPPINGS =
  1301. #---------------------------------------------------------------------------
  1302. # Configuration options related to the LaTeX output
  1303. #---------------------------------------------------------------------------
  1304. # If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
  1305. # The default value is: YES.
  1306. GENERATE_LATEX = NO
  1307. # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
  1308. # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
  1309. # it.
  1310. # The default directory is: latex.
  1311. # This tag requires that the tag GENERATE_LATEX is set to YES.
  1312. LATEX_OUTPUT = latex
  1313. # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
  1314. # invoked.
  1315. #
  1316. # Note that when enabling USE_PDFLATEX this option is only used for generating
  1317. # bitmaps for formulas in the HTML output, but not in the Makefile that is
  1318. # written to the output directory.
  1319. # The default file is: latex.
  1320. # This tag requires that the tag GENERATE_LATEX is set to YES.
  1321. LATEX_CMD_NAME = latex
  1322. # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
  1323. # index for LaTeX.
  1324. # The default file is: makeindex.
  1325. # This tag requires that the tag GENERATE_LATEX is set to YES.
  1326. MAKEINDEX_CMD_NAME = makeindex
  1327. # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
  1328. # documents. This may be useful for small projects and may help to save some
  1329. # trees in general.
  1330. # The default value is: NO.
  1331. # This tag requires that the tag GENERATE_LATEX is set to YES.
  1332. COMPACT_LATEX = NO
  1333. # The PAPER_TYPE tag can be used to set the paper type that is used by the
  1334. # printer.
  1335. # Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
  1336. # 14 inches) and executive (7.25 x 10.5 inches).
  1337. # The default value is: a4.
  1338. # This tag requires that the tag GENERATE_LATEX is set to YES.
  1339. PAPER_TYPE = a4
  1340. # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
  1341. # that should be included in the LaTeX output. The package can be specified just
  1342. # by its name or with the correct syntax as to be used with the LaTeX
  1343. # \usepackage command. To get the times font for instance you can specify :
  1344. # EXTRA_PACKAGES=times or EXTRA_PACKAGES={times}
  1345. # To use the option intlimits with the amsmath package you can specify:
  1346. # EXTRA_PACKAGES=[intlimits]{amsmath}
  1347. # If left blank no extra packages will be included.
  1348. # This tag requires that the tag GENERATE_LATEX is set to YES.
  1349. EXTRA_PACKAGES =
  1350. # The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
  1351. # generated LaTeX document. The header should contain everything until the first
  1352. # chapter. If it is left blank doxygen will generate a standard header. See
  1353. # section "Doxygen usage" for information on how to let doxygen write the
  1354. # default header to a separate file.
  1355. #
  1356. # Note: Only use a user-defined header if you know what you are doing! The
  1357. # following commands have a special meaning inside the header: $title,
  1358. # $datetime, $date, $doxygenversion, $projectname, $projectnumber,
  1359. # $projectbrief, $projectlogo. Doxygen will replace $title with the empty
  1360. # string, for the replacement values of the other commands the user is referred
  1361. # to HTML_HEADER.
  1362. # This tag requires that the tag GENERATE_LATEX is set to YES.
  1363. LATEX_HEADER =
  1364. # The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
  1365. # generated LaTeX document. The footer should contain everything after the last
  1366. # chapter. If it is left blank doxygen will generate a standard footer. See
  1367. # LATEX_HEADER for more information on how to generate a default footer and what
  1368. # special commands can be used inside the footer.
  1369. #
  1370. # Note: Only use a user-defined footer if you know what you are doing!
  1371. # This tag requires that the tag GENERATE_LATEX is set to YES.
  1372. LATEX_FOOTER =
  1373. # The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
  1374. # LaTeX style sheets that are included after the standard style sheets created
  1375. # by doxygen. Using this option one can overrule certain style aspects. Doxygen
  1376. # will copy the style sheet files to the output directory.
  1377. # Note: The order of the extra style sheet files is of importance (e.g. the last
  1378. # style sheet in the list overrules the setting of the previous ones in the
  1379. # list).
  1380. # This tag requires that the tag GENERATE_LATEX is set to YES.
  1381. LATEX_EXTRA_STYLESHEET =
  1382. # The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
  1383. # other source files which should be copied to the LATEX_OUTPUT output
  1384. # directory. Note that the files will be copied as-is; there are no commands or
  1385. # markers available.
  1386. # This tag requires that the tag GENERATE_LATEX is set to YES.
  1387. LATEX_EXTRA_FILES =
  1388. # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
  1389. # prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
  1390. # contain links (just like the HTML output) instead of page references. This
  1391. # makes the output suitable for online browsing using a PDF viewer.
  1392. # The default value is: YES.
  1393. # This tag requires that the tag GENERATE_LATEX is set to YES.
  1394. PDF_HYPERLINKS = YES
  1395. # If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
  1396. # the PDF file directly from the LaTeX files. Set this option to YES, to get a
  1397. # higher quality PDF documentation.
  1398. # The default value is: YES.
  1399. # This tag requires that the tag GENERATE_LATEX is set to YES.
  1400. USE_PDFLATEX = YES
  1401. # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
  1402. # command to the generated LaTeX files. This will instruct LaTeX to keep running
  1403. # if errors occur, instead of asking the user for help. This option is also used
  1404. # when generating formulas in HTML.
  1405. # The default value is: NO.
  1406. # This tag requires that the tag GENERATE_LATEX is set to YES.
  1407. LATEX_BATCHMODE = NO
  1408. # If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
  1409. # index chapters (such as File Index, Compound Index, etc.) in the output.
  1410. # The default value is: NO.
  1411. # This tag requires that the tag GENERATE_LATEX is set to YES.
  1412. LATEX_HIDE_INDICES = NO
  1413. # If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
  1414. # code with syntax highlighting in the LaTeX output.
  1415. #
  1416. # Note that which sources are shown also depends on other settings such as
  1417. # SOURCE_BROWSER.
  1418. # The default value is: NO.
  1419. # This tag requires that the tag GENERATE_LATEX is set to YES.
  1420. LATEX_SOURCE_CODE = NO
  1421. # The LATEX_BIB_STYLE tag can be used to specify the style to use for the
  1422. # bibliography, e.g. plainnat, or ieeetr. See
  1423. # http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
  1424. # The default value is: plain.
  1425. # This tag requires that the tag GENERATE_LATEX is set to YES.
  1426. LATEX_BIB_STYLE = plain
  1427. # If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated
  1428. # page will contain the date and time when the page was generated. Setting this
  1429. # to NO can help when comparing the output of multiple runs.
  1430. # The default value is: NO.
  1431. # This tag requires that the tag GENERATE_LATEX is set to YES.
  1432. LATEX_TIMESTAMP = NO
  1433. #---------------------------------------------------------------------------
  1434. # Configuration options related to the RTF output
  1435. #---------------------------------------------------------------------------
  1436. # If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
  1437. # RTF output is optimized for Word 97 and may not look too pretty with other RTF
  1438. # readers/editors.
  1439. # The default value is: NO.
  1440. GENERATE_RTF = NO
  1441. # The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
  1442. # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
  1443. # it.
  1444. # The default directory is: rtf.
  1445. # This tag requires that the tag GENERATE_RTF is set to YES.
  1446. RTF_OUTPUT = rtf
  1447. # If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
  1448. # documents. This may be useful for small projects and may help to save some
  1449. # trees in general.
  1450. # The default value is: NO.
  1451. # This tag requires that the tag GENERATE_RTF is set to YES.
  1452. COMPACT_RTF = NO
  1453. # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
  1454. # contain hyperlink fields. The RTF file will contain links (just like the HTML
  1455. # output) instead of page references. This makes the output suitable for online
  1456. # browsing using Word or some other Word compatible readers that support those
  1457. # fields.
  1458. #
  1459. # Note: WordPad (write) and others do not support links.
  1460. # The default value is: NO.
  1461. # This tag requires that the tag GENERATE_RTF is set to YES.
  1462. RTF_HYPERLINKS = NO
  1463. # Load stylesheet definitions from file. Syntax is similar to doxygen's config
  1464. # file, i.e. a series of assignments. You only have to provide replacements,
  1465. # missing definitions are set to their default value.
  1466. #
  1467. # See also section "Doxygen usage" for information on how to generate the
  1468. # default style sheet that doxygen normally uses.
  1469. # This tag requires that the tag GENERATE_RTF is set to YES.
  1470. RTF_STYLESHEET_FILE =
  1471. # Set optional variables used in the generation of an RTF document. Syntax is
  1472. # similar to doxygen's config file. A template extensions file can be generated
  1473. # using doxygen -e rtf extensionFile.
  1474. # This tag requires that the tag GENERATE_RTF is set to YES.
  1475. RTF_EXTENSIONS_FILE =
  1476. # If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
  1477. # with syntax highlighting in the RTF output.
  1478. #
  1479. # Note that which sources are shown also depends on other settings such as
  1480. # SOURCE_BROWSER.
  1481. # The default value is: NO.
  1482. # This tag requires that the tag GENERATE_RTF is set to YES.
  1483. RTF_SOURCE_CODE = NO
  1484. #---------------------------------------------------------------------------
  1485. # Configuration options related to the man page output
  1486. #---------------------------------------------------------------------------
  1487. # If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
  1488. # classes and files.
  1489. # The default value is: NO.
  1490. GENERATE_MAN = NO
  1491. # The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
  1492. # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
  1493. # it. A directory man3 will be created inside the directory specified by
  1494. # MAN_OUTPUT.
  1495. # The default directory is: man.
  1496. # This tag requires that the tag GENERATE_MAN is set to YES.
  1497. MAN_OUTPUT = man
  1498. # The MAN_EXTENSION tag determines the extension that is added to the generated
  1499. # man pages. In case the manual section does not start with a number, the number
  1500. # 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
  1501. # optional.
  1502. # The default value is: .3.
  1503. # This tag requires that the tag GENERATE_MAN is set to YES.
  1504. MAN_EXTENSION = .3
  1505. # The MAN_SUBDIR tag determines the name of the directory created within
  1506. # MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
  1507. # MAN_EXTENSION with the initial . removed.
  1508. # This tag requires that the tag GENERATE_MAN is set to YES.
  1509. MAN_SUBDIR =
  1510. # If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
  1511. # will generate one additional man file for each entity documented in the real
  1512. # man page(s). These additional files only source the real man page, but without
  1513. # them the man command would be unable to find the correct page.
  1514. # The default value is: NO.
  1515. # This tag requires that the tag GENERATE_MAN is set to YES.
  1516. MAN_LINKS = NO
  1517. #---------------------------------------------------------------------------
  1518. # Configuration options related to the XML output
  1519. #---------------------------------------------------------------------------
  1520. # If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
  1521. # captures the structure of the code including all documentation.
  1522. # The default value is: NO.
  1523. GENERATE_XML = NO
  1524. # The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
  1525. # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
  1526. # it.
  1527. # The default directory is: xml.
  1528. # This tag requires that the tag GENERATE_XML is set to YES.
  1529. XML_OUTPUT = xml
  1530. # If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
  1531. # listings (including syntax highlighting and cross-referencing information) to
  1532. # the XML output. Note that enabling this will significantly increase the size
  1533. # of the XML output.
  1534. # The default value is: YES.
  1535. # This tag requires that the tag GENERATE_XML is set to YES.
  1536. XML_PROGRAMLISTING = YES
  1537. #---------------------------------------------------------------------------
  1538. # Configuration options related to the DOCBOOK output
  1539. #---------------------------------------------------------------------------
  1540. # If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
  1541. # that can be used to generate PDF.
  1542. # The default value is: NO.
  1543. GENERATE_DOCBOOK = NO
  1544. # The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
  1545. # If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
  1546. # front of it.
  1547. # The default directory is: docbook.
  1548. # This tag requires that the tag GENERATE_DOCBOOK is set to YES.
  1549. DOCBOOK_OUTPUT = docbook
  1550. # If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
  1551. # program listings (including syntax highlighting and cross-referencing
  1552. # information) to the DOCBOOK output. Note that enabling this will significantly
  1553. # increase the size of the DOCBOOK output.
  1554. # The default value is: NO.
  1555. # This tag requires that the tag GENERATE_DOCBOOK is set to YES.
  1556. DOCBOOK_PROGRAMLISTING = NO
  1557. #---------------------------------------------------------------------------
  1558. # Configuration options for the AutoGen Definitions output
  1559. #---------------------------------------------------------------------------
  1560. # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
  1561. # AutoGen Definitions (see http://autogen.sf.net) file that captures the
  1562. # structure of the code including all documentation. Note that this feature is
  1563. # still experimental and incomplete at the moment.
  1564. # The default value is: NO.
  1565. GENERATE_AUTOGEN_DEF = NO
  1566. #---------------------------------------------------------------------------
  1567. # Configuration options related to the Perl module output
  1568. #---------------------------------------------------------------------------
  1569. # If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
  1570. # file that captures the structure of the code including all documentation.
  1571. #
  1572. # Note that this feature is still experimental and incomplete at the moment.
  1573. # The default value is: NO.
  1574. GENERATE_PERLMOD = NO
  1575. # If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
  1576. # Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
  1577. # output from the Perl module output.
  1578. # The default value is: NO.
  1579. # This tag requires that the tag GENERATE_PERLMOD is set to YES.
  1580. PERLMOD_LATEX = NO
  1581. # If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
  1582. # formatted so it can be parsed by a human reader. This is useful if you want to
  1583. # understand what is going on. On the other hand, if this tag is set to NO, the
  1584. # size of the Perl module output will be much smaller and Perl will parse it
  1585. # just the same.
  1586. # The default value is: YES.
  1587. # This tag requires that the tag GENERATE_PERLMOD is set to YES.
  1588. PERLMOD_PRETTY = YES
  1589. # The names of the make variables in the generated doxyrules.make file are
  1590. # prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
  1591. # so different doxyrules.make files included by the same Makefile don't
  1592. # overwrite each other's variables.
  1593. # This tag requires that the tag GENERATE_PERLMOD is set to YES.
  1594. PERLMOD_MAKEVAR_PREFIX =
  1595. #---------------------------------------------------------------------------
  1596. # Configuration options related to the preprocessor
  1597. #---------------------------------------------------------------------------
  1598. # If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
  1599. # C-preprocessor directives found in the sources and include files.
  1600. # The default value is: YES.
  1601. ENABLE_PREPROCESSING = YES
  1602. # If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
  1603. # in the source code. If set to NO, only conditional compilation will be
  1604. # performed. Macro expansion can be done in a controlled way by setting
  1605. # EXPAND_ONLY_PREDEF to YES.
  1606. # The default value is: NO.
  1607. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
  1608. MACRO_EXPANSION = NO
  1609. # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
  1610. # the macro expansion is limited to the macros specified with the PREDEFINED and
  1611. # EXPAND_AS_DEFINED tags.
  1612. # The default value is: NO.
  1613. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
  1614. EXPAND_ONLY_PREDEF = NO
  1615. # If the SEARCH_INCLUDES tag is set to YES, the include files in the
  1616. # INCLUDE_PATH will be searched if a #include is found.
  1617. # The default value is: YES.
  1618. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
  1619. SEARCH_INCLUDES = YES
  1620. # The INCLUDE_PATH tag can be used to specify one or more directories that
  1621. # contain include files that are not input files but should be processed by the
  1622. # preprocessor.
  1623. # This tag requires that the tag SEARCH_INCLUDES is set to YES.
  1624. INCLUDE_PATH =
  1625. # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
  1626. # patterns (like *.h and *.hpp) to filter out the header-files in the
  1627. # directories. If left blank, the patterns specified with FILE_PATTERNS will be
  1628. # used.
  1629. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
  1630. INCLUDE_FILE_PATTERNS =
  1631. # The PREDEFINED tag can be used to specify one or more macro names that are
  1632. # defined before the preprocessor is started (similar to the -D option of e.g.
  1633. # gcc). The argument of the tag is a list of macros of the form: name or
  1634. # name=definition (no spaces). If the definition and the "=" are omitted, "=1"
  1635. # is assumed. To prevent a macro definition from being undefined via #undef or
  1636. # recursively expanded use the := operator instead of the = operator.
  1637. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
  1638. PREDEFINED =
  1639. # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
  1640. # tag can be used to specify a list of macro names that should be expanded. The
  1641. # macro definition that is found in the sources will be used. Use the PREDEFINED
  1642. # tag if you want to use a different macro definition that overrules the
  1643. # definition found in the source code.
  1644. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
  1645. EXPAND_AS_DEFINED =
  1646. # If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
  1647. # remove all references to function-like macros that are alone on a line, have
  1648. # an all uppercase name, and do not end with a semicolon. Such function macros
  1649. # are typically used for boiler-plate code, and will confuse the parser if not
  1650. # removed.
  1651. # The default value is: YES.
  1652. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
  1653. SKIP_FUNCTION_MACROS = YES
  1654. #---------------------------------------------------------------------------
  1655. # Configuration options related to external references
  1656. #---------------------------------------------------------------------------
  1657. # The TAGFILES tag can be used to specify one or more tag files. For each tag
  1658. # file the location of the external documentation should be added. The format of
  1659. # a tag file without this location is as follows:
  1660. # TAGFILES = file1 file2 ...
  1661. # Adding location for the tag files is done as follows:
  1662. # TAGFILES = file1=loc1 "file2 = loc2" ...
  1663. # where loc1 and loc2 can be relative or absolute paths or URLs. See the
  1664. # section "Linking to external documentation" for more information about the use
  1665. # of tag files.
  1666. # Note: Each tag file must have a unique name (where the name does NOT include
  1667. # the path). If a tag file is not located in the directory in which doxygen is
  1668. # run, you must also specify the path to the tagfile here.
  1669. TAGFILES =
  1670. # When a file name is specified after GENERATE_TAGFILE, doxygen will create a
  1671. # tag file that is based on the input files it reads. See section "Linking to
  1672. # external documentation" for more information about the usage of tag files.
  1673. GENERATE_TAGFILE =
  1674. # If the ALLEXTERNALS tag is set to YES, all external class will be listed in
  1675. # the class index. If set to NO, only the inherited external classes will be
  1676. # listed.
  1677. # The default value is: NO.
  1678. ALLEXTERNALS = NO
  1679. # If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
  1680. # in the modules index. If set to NO, only the current project's groups will be
  1681. # listed.
  1682. # The default value is: YES.
  1683. EXTERNAL_GROUPS = YES
  1684. # If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
  1685. # the related pages index. If set to NO, only the current project's pages will
  1686. # be listed.
  1687. # The default value is: YES.
  1688. EXTERNAL_PAGES = YES
  1689. # The PERL_PATH should be the absolute path and name of the perl script
  1690. # interpreter (i.e. the result of 'which perl').
  1691. # The default file (with absolute path) is: /usr/bin/perl.
  1692. PERL_PATH = /usr/bin/perl
  1693. #---------------------------------------------------------------------------
  1694. # Configuration options related to the dot tool
  1695. #---------------------------------------------------------------------------
  1696. # If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
  1697. # (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
  1698. # NO turns the diagrams off. Note that this option also works with HAVE_DOT
  1699. # disabled, but it is recommended to install and use dot, since it yields more
  1700. # powerful graphs.
  1701. # The default value is: YES.
  1702. CLASS_DIAGRAMS = YES
  1703. # You can define message sequence charts within doxygen comments using the \msc
  1704. # command. Doxygen will then run the mscgen tool (see:
  1705. # http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
  1706. # documentation. The MSCGEN_PATH tag allows you to specify the directory where
  1707. # the mscgen tool resides. If left empty the tool is assumed to be found in the
  1708. # default search path.
  1709. MSCGEN_PATH =
  1710. # You can include diagrams made with dia in doxygen documentation. Doxygen will
  1711. # then run dia to produce the diagram and insert it in the documentation. The
  1712. # DIA_PATH tag allows you to specify the directory where the dia binary resides.
  1713. # If left empty dia is assumed to be found in the default search path.
  1714. DIA_PATH =
  1715. # If set to YES the inheritance and collaboration graphs will hide inheritance
  1716. # and usage relations if the target is undocumented or is not a class.
  1717. # The default value is: YES.
  1718. HIDE_UNDOC_RELATIONS = YES
  1719. # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
  1720. # available from the path. This tool is part of Graphviz (see:
  1721. # http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
  1722. # Bell Labs. The other options in this section have no effect if this option is
  1723. # set to NO
  1724. # The default value is: YES.
  1725. HAVE_DOT = NO
  1726. # The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
  1727. # to run in parallel. When set to 0 doxygen will base this on the number of
  1728. # processors available in the system. You can set it explicitly to a value
  1729. # larger than 0 to get control over the balance between CPU load and processing
  1730. # speed.
  1731. # Minimum value: 0, maximum value: 32, default value: 0.
  1732. # This tag requires that the tag HAVE_DOT is set to YES.
  1733. DOT_NUM_THREADS = 0
  1734. # When you want a differently looking font in the dot files that doxygen
  1735. # generates you can specify the font name using DOT_FONTNAME. You need to make
  1736. # sure dot is able to find the font, which can be done by putting it in a
  1737. # standard location or by setting the DOTFONTPATH environment variable or by
  1738. # setting DOT_FONTPATH to the directory containing the font.
  1739. # The default value is: Helvetica.
  1740. # This tag requires that the tag HAVE_DOT is set to YES.
  1741. DOT_FONTNAME = Helvetica
  1742. # The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
  1743. # dot graphs.
  1744. # Minimum value: 4, maximum value: 24, default value: 10.
  1745. # This tag requires that the tag HAVE_DOT is set to YES.
  1746. DOT_FONTSIZE = 10
  1747. # By default doxygen will tell dot to use the default font as specified with
  1748. # DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
  1749. # the path where dot can find it using this tag.
  1750. # This tag requires that the tag HAVE_DOT is set to YES.
  1751. DOT_FONTPATH =
  1752. # If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
  1753. # each documented class showing the direct and indirect inheritance relations.
  1754. # Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
  1755. # The default value is: YES.
  1756. # This tag requires that the tag HAVE_DOT is set to YES.
  1757. CLASS_GRAPH = YES
  1758. # If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
  1759. # graph for each documented class showing the direct and indirect implementation
  1760. # dependencies (inheritance, containment, and class references variables) of the
  1761. # class with other documented classes.
  1762. # The default value is: YES.
  1763. # This tag requires that the tag HAVE_DOT is set to YES.
  1764. COLLABORATION_GRAPH = YES
  1765. # If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
  1766. # groups, showing the direct groups dependencies.
  1767. # The default value is: YES.
  1768. # This tag requires that the tag HAVE_DOT is set to YES.
  1769. GROUP_GRAPHS = YES
  1770. # If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
  1771. # collaboration diagrams in a style similar to the OMG's Unified Modeling
  1772. # Language.
  1773. # The default value is: NO.
  1774. # This tag requires that the tag HAVE_DOT is set to YES.
  1775. UML_LOOK = NO
  1776. # If the UML_LOOK tag is enabled, the fields and methods are shown inside the
  1777. # class node. If there are many fields or methods and many nodes the graph may
  1778. # become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
  1779. # number of items for each type to make the size more manageable. Set this to 0
  1780. # for no limit. Note that the threshold may be exceeded by 50% before the limit
  1781. # is enforced. So when you set the threshold to 10, up to 15 fields may appear,
  1782. # but if the number exceeds 15, the total amount of fields shown is limited to
  1783. # 10.
  1784. # Minimum value: 0, maximum value: 100, default value: 10.
  1785. # This tag requires that the tag HAVE_DOT is set to YES.
  1786. UML_LIMIT_NUM_FIELDS = 10
  1787. # If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
  1788. # collaboration graphs will show the relations between templates and their
  1789. # instances.
  1790. # The default value is: NO.
  1791. # This tag requires that the tag HAVE_DOT is set to YES.
  1792. TEMPLATE_RELATIONS = NO
  1793. # If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
  1794. # YES then doxygen will generate a graph for each documented file showing the
  1795. # direct and indirect include dependencies of the file with other documented
  1796. # files.
  1797. # The default value is: YES.
  1798. # This tag requires that the tag HAVE_DOT is set to YES.
  1799. INCLUDE_GRAPH = YES
  1800. # If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
  1801. # set to YES then doxygen will generate a graph for each documented file showing
  1802. # the direct and indirect include dependencies of the file with other documented
  1803. # files.
  1804. # The default value is: YES.
  1805. # This tag requires that the tag HAVE_DOT is set to YES.
  1806. INCLUDED_BY_GRAPH = YES
  1807. # If the CALL_GRAPH tag is set to YES then doxygen will generate a call
  1808. # dependency graph for every global function or class method.
  1809. #
  1810. # Note that enabling this option will significantly increase the time of a run.
  1811. # So in most cases it will be better to enable call graphs for selected
  1812. # functions only using the \callgraph command. Disabling a call graph can be
  1813. # accomplished by means of the command \hidecallgraph.
  1814. # The default value is: NO.
  1815. # This tag requires that the tag HAVE_DOT is set to YES.
  1816. CALL_GRAPH = NO
  1817. # If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
  1818. # dependency graph for every global function or class method.
  1819. #
  1820. # Note that enabling this option will significantly increase the time of a run.
  1821. # So in most cases it will be better to enable caller graphs for selected
  1822. # functions only using the \callergraph command. Disabling a caller graph can be
  1823. # accomplished by means of the command \hidecallergraph.
  1824. # The default value is: NO.
  1825. # This tag requires that the tag HAVE_DOT is set to YES.
  1826. CALLER_GRAPH = NO
  1827. # If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
  1828. # hierarchy of all classes instead of a textual one.
  1829. # The default value is: YES.
  1830. # This tag requires that the tag HAVE_DOT is set to YES.
  1831. GRAPHICAL_HIERARCHY = YES
  1832. # If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
  1833. # dependencies a directory has on other directories in a graphical way. The
  1834. # dependency relations are determined by the #include relations between the
  1835. # files in the directories.
  1836. # The default value is: YES.
  1837. # This tag requires that the tag HAVE_DOT is set to YES.
  1838. DIRECTORY_GRAPH = YES
  1839. # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
  1840. # generated by dot. For an explanation of the image formats see the section
  1841. # output formats in the documentation of the dot tool (Graphviz (see:
  1842. # http://www.graphviz.org/)).
  1843. # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
  1844. # to make the SVG files visible in IE 9+ (other browsers do not have this
  1845. # requirement).
  1846. # Possible values are: png, png:cairo, png:cairo:cairo, png:cairo:gd, png:gd,
  1847. # png:gd:gd, jpg, jpg:cairo, jpg:cairo:gd, jpg:gd, jpg:gd:gd, gif, gif:cairo,
  1848. # gif:cairo:gd, gif:gd, gif:gd:gd, svg, png:gd, png:gd:gd, png:cairo,
  1849. # png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and
  1850. # png:gdiplus:gdiplus.
  1851. # The default value is: png.
  1852. # This tag requires that the tag HAVE_DOT is set to YES.
  1853. DOT_IMAGE_FORMAT = png
  1854. # If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
  1855. # enable generation of interactive SVG images that allow zooming and panning.
  1856. #
  1857. # Note that this requires a modern browser other than Internet Explorer. Tested
  1858. # and working are Firefox, Chrome, Safari, and Opera.
  1859. # Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
  1860. # the SVG files visible. Older versions of IE do not have SVG support.
  1861. # The default value is: NO.
  1862. # This tag requires that the tag HAVE_DOT is set to YES.
  1863. INTERACTIVE_SVG = NO
  1864. # The DOT_PATH tag can be used to specify the path where the dot tool can be
  1865. # found. If left blank, it is assumed the dot tool can be found in the path.
  1866. # This tag requires that the tag HAVE_DOT is set to YES.
  1867. DOT_PATH =
  1868. # The DOTFILE_DIRS tag can be used to specify one or more directories that
  1869. # contain dot files that are included in the documentation (see the \dotfile
  1870. # command).
  1871. # This tag requires that the tag HAVE_DOT is set to YES.
  1872. DOTFILE_DIRS =
  1873. # The MSCFILE_DIRS tag can be used to specify one or more directories that
  1874. # contain msc files that are included in the documentation (see the \mscfile
  1875. # command).
  1876. MSCFILE_DIRS =
  1877. # The DIAFILE_DIRS tag can be used to specify one or more directories that
  1878. # contain dia files that are included in the documentation (see the \diafile
  1879. # command).
  1880. DIAFILE_DIRS =
  1881. # When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
  1882. # path where java can find the plantuml.jar file. If left blank, it is assumed
  1883. # PlantUML is not used or called during a preprocessing step. Doxygen will
  1884. # generate a warning when it encounters a \startuml command in this case and
  1885. # will not generate output for the diagram.
  1886. PLANTUML_JAR_PATH =
  1887. # When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a
  1888. # configuration file for plantuml.
  1889. PLANTUML_CFG_FILE =
  1890. # When using plantuml, the specified paths are searched for files specified by
  1891. # the !include statement in a plantuml block.
  1892. PLANTUML_INCLUDE_PATH =
  1893. # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
  1894. # that will be shown in the graph. If the number of nodes in a graph becomes
  1895. # larger than this value, doxygen will truncate the graph, which is visualized
  1896. # by representing a node as a red box. Note that doxygen if the number of direct
  1897. # children of the root node in a graph is already larger than
  1898. # DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
  1899. # the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
  1900. # Minimum value: 0, maximum value: 10000, default value: 50.
  1901. # This tag requires that the tag HAVE_DOT is set to YES.
  1902. DOT_GRAPH_MAX_NODES = 50
  1903. # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
  1904. # generated by dot. A depth value of 3 means that only nodes reachable from the
  1905. # root by following a path via at most 3 edges will be shown. Nodes that lay
  1906. # further from the root node will be omitted. Note that setting this option to 1
  1907. # or 2 may greatly reduce the computation time needed for large code bases. Also
  1908. # note that the size of a graph can be further restricted by
  1909. # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
  1910. # Minimum value: 0, maximum value: 1000, default value: 0.
  1911. # This tag requires that the tag HAVE_DOT is set to YES.
  1912. MAX_DOT_GRAPH_DEPTH = 0
  1913. # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
  1914. # background. This is disabled by default, because dot on Windows does not seem
  1915. # to support this out of the box.
  1916. #
  1917. # Warning: Depending on the platform used, enabling this option may lead to
  1918. # badly anti-aliased labels on the edges of a graph (i.e. they become hard to
  1919. # read).
  1920. # The default value is: NO.
  1921. # This tag requires that the tag HAVE_DOT is set to YES.
  1922. DOT_TRANSPARENT = NO
  1923. # Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
  1924. # files in one run (i.e. multiple -o and -T options on the command line). This
  1925. # makes dot run faster, but since only newer versions of dot (>1.8.10) support
  1926. # this, this feature is disabled by default.
  1927. # The default value is: NO.
  1928. # This tag requires that the tag HAVE_DOT is set to YES.
  1929. DOT_MULTI_TARGETS = NO
  1930. # If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
  1931. # explaining the meaning of the various boxes and arrows in the dot generated
  1932. # graphs.
  1933. # The default value is: YES.
  1934. # This tag requires that the tag HAVE_DOT is set to YES.
  1935. GENERATE_LEGEND = YES
  1936. # If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
  1937. # files that are used to generate the various graphs.
  1938. # The default value is: YES.
  1939. # This tag requires that the tag HAVE_DOT is set to YES.
  1940. DOT_CLEANUP = YES